High Capacity Lithium Polymer Battery , 3.2V 100Ah 100AH Lithium Deep Cycle Battery
High Capacity Lithium Polymer Battery , 3.2V 100Ah 100AH Lithium Deep Cycle Battery
Advantages of LiFePO4 battery
Longer battery life – 3000 cycles @80%DOD, 5 times more than lead acid batteries
Low self-discharge
Steady discharge and charge performance.
Easy carrying and installation - can be carried and installed in any direction
Outstanding thermal stability
Wide temperature performance
Short circuit protection
Over charge and over discharge protection
Over current protection
Lighter weight - 1/2~1/4 in weight compared to LA batteries
Require no change to a lead acid battery charging system
Better safety - mild warm, no explosion and firing, free of leakage
Parameter
| Description/ Item | Specifications | Remarks |
| Nominal Capacity | 100.0Ah | 2.5~3.65V " 50A Discharge Current " Initial Status " |
| Minimum Capacity | 100.0 Ah | 2.5~3.65V " 50A Discharge Current " Initial Status " |
| Operating Voltage Range | 2.50 - 3.65V | N.A. " |
| Initial Inner Resistance(1KHz) | ≤0.35mΩ | Initial Status " 50% SOC " |
| Initial SOC | ≈40%SOC (40 Ah) | N.A. " |
| Charge Temperature Range | 0 ~ 55℃ | Refer to 2.2 " |
| Discharge Temperature Range | -20 ~ 55℃ | Refer to 2.3 " |
| Weight | ≤2.25Kg | N.A. " |
| Self-discharge | ≤3.5% per month | 25℃ / 50% SOC / Within 3 months since Date of Manufacture |
| Dimensions | Refer to 9. Cell Design Drawing | |
| Standard Charge Current | 0.5C | 25℃ |
| Standard Charge Voltage | ≤3.65V | 25℃ |
| Standard Charge Mode | Using 0.5C Constant Current (CC) to charge to 3.65V, then Constant Voltage (CV) at 3.65V to charge until charge current reaches the lower limit of 5.0±0.5A. | |
| Standard Charge Temperature | 25℃ | Cell Temperature |
| Absolute Charge Temperature | 0～55℃ | Terminating charge process, once the cell temperature is beyond Absolute Charge Temperature. |
| Absolute Charge Voltage | ≤3.8V | Terminating charge process, once the cell OCV is beyond AbsoluteCharge Voltage. |
| Cell Temperature " | Standard Charge | Rapid Charge |
| ＜0℃ | Prohibited to charge | Prohibited to charge |
| 0～10℃ | Charge Current 0.1C | Prohibited to charge |
| 10～15℃ | Charge Current 0.2C | Charge Current 0.3C |
| 15～25℃ | Charge Current 0.3C | Charge Current 0.5C |
| 25～45℃ | Charge Current 0.5C | Charge Current 1.0C |
| 45～55℃ | Charge Current 0.3C | |
| ＞55℃ | Prohibited to charge | |
| Standard Discharge Current | 50.0A | 25℃ " |
| Maximum Continuous Discharge Current | 100.0A | N.A. " |
| Maximum Discharge Long-Pulse Current | 200.0A | 3 minutes maximum " |
| Maximum Discharge Short-Pulse Current | 300.0A | Cell temperature lower than 50℃ " When SOC＞40% |
| Discharge cut-off Voltage | ≥2.5V | N.A. " |
| Standard Discharge Temperature | 25℃ | Cell Temperature " |
| Absolute Discharge Temperature | -20～55℃ | Regardless of the discharge mode, the discharge process should be terminated, oncethe cell temperature is beyond Absolute Discharge Temperature. |
Charge and Discharge Curve
Dimensions
Packaging
Factory Review
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.