3.7V 10Ah Rechargeable Lithium Batteries for Electric Vehicles with High Density
3.7V 10Ah Rechargeable Lithium Batteries for Electric Vehicles with High Density
VICT 3.7V 15AH Lithium Polymer Battery Cells (Li-NCM) can be used to Electric vehicles and other energy storage applications. These Lithium Polymer Li(NiCoMn)O2 batteries are rated at more than 1500 recharge cycles with high density.
The Lithium Polymer Li(NiCoMn)O2 Battery is a type of rechargeable battery based on the original lithium ion chemistry, created by manganese(Mn), nickel(Ni), cobalt(Co), as cathode material. Li-NCM cells have a flexible, foil-type case, therefore they are relatively unconstrained. Due to electrolyte decreasing, further enhancing battery safety and being able to be positioned in any direction.
Our Li polymer batteries passed all safety tests(short circuit, overcharge, overdischarge, over temperature, needle penetration tests, drop, crush etc). These battery cells are no explosion, no fire and no leakage.
Specifications
| Item | Specification |
| Rated Capacity | 10.0Ah ,0.5 C discharging |
| Nominal Capacity | 10.0Ah ,0.5 C discharging |
| Normal Voltage | 3.7V |
| O.C.V | 3.70-3.90V |
| Charge Ending Voltage | 4.20V |
| Discharge Ending Voltage | 3.00V |
| Standard charging method | 0℃～ 45℃ 0.5C constant current charge to 4.2V, then constant voltage 4.2V charge till charged current declines to ≤ 0.02C |
| Charge current | Standard charge:5.0A Rapid charge:10.0A |
| Max Charging Current | 10.0A(5℃～+45℃) |
| Standard discharging Current | -20℃～+60℃ 0.5C constant current discharge to 3.0V. |
| Max. Discharging Current | 30.0A(-10℃～+60℃) |
| Operating environment | Charging: 0℃-45℃, max.85%RH Discharging: -20℃-60℃, max.85%RH |
| Initial Impedance | ＜8mΩ, 3.85V AC 1KHz measured |
| Cell Weight | About 208 g |
Charge and Discharge Curve
Dimension
| Item | Description | Dimension |
| T | Cellmax. Initial | 8.8mm |
| After 600 cycle life | 9.0mm | |
| W | Cell Width max. | 65.5mm |
| H | Cell Height max. | 192.0mm |
| A | Cell Tab length | 15±2.0mm |
| B | Cell Tab Pitch | 20±1.0mm |
| C | Cell Tab width | 12±0.1mm |
| D | Cell Top sealant length | 4.5±0.5mm |
Packaging
Quality Assurance
We do nail penetration test with fully charged, no fire, no explosion, completely safe.
Application
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.