Small Volume 3.7V 60AH Lithium Battery , Light Weight Lithium Ion Battery Pack
Small Volume 3.7V 60AH Lithium Battery , Light Weight Lithium Ion Battery Pack
Product Advantage
1) Thermal stability
2) Very low self discharge
3) High power and energy densities up to 180wh/kg
4) Wide operation temperature with good performance
5) Safe and reliable
6) Lighter and smaller than lead acid battery.
Why choose VICT ?
- 10 years lithium battery engineering and manufacturing.
- Fast Reply, 7 x 24 hours service.
- Our R&D colleagues are from the top 2 university and scientific institution of studying lithium chemical in china.
- Strict Quality Control: We set strict QC standards include appearance, package, internal structure, electric performance etc.
- We promise to offer our customers high quality battery. Customer first culture: 80% of our customers are 5 years above long term partners.
- Our production is under strict control of RoHS, providing environmentally-friendly products.
Parameter
| Item | Rating | Note |
| Battery Model | BHPNL5P60E | 3.7V 60Ah Li-NCM battery module |
| Cell Type | BCPNL12P Li-NCM cell | 5 pieces of 3.7V 12Ah cells in parallel config |
| Block Dimensions (L*W*H) | 71*75*147 mm(with top lid) | 71*75*144 mm (without top lid) |
| Block Weight | 1.38 ± 0.05 kg | |
| Rated Capacity | ≥ 60,000 mAh | (C/3 Discharge, 23°C ) |
| Available Energy | ≥ 222 Wh | About 160 Wh/kg |
| Charging Voltage | ≤ 4.2 ± 0.05 V | CC/CV charge mode |
| Operating Voltage | 3.7 V @ C/3, 23°C/73°F (3.0 V cut off) | Average working voltage |
| Nominal Charge Current | ≤ 30 A (C/2 charge, 23°C/ 77°F) | Suggested charge current is ≤ 20 A, C/3 |
| Nominal Discharge Current | ≤ 120 A @continuous (2C, 23°C) | |
| Peak Discharge Current | ≤ 300 A @10sec (5C, 23°C) | |
| Internal Resistance | ≤ 2 mΩ | AC internal resistance |
| Operating Temperature | Charge: 0°C ~ 45°CDischarge: -20°C ~ 45°C | Suggested charging temp: 10°C ~ 35°CSuggested discharging temp: 0°C ~ 35°C |
| Storage Temperature( ≥ 3 months) | 15°C ~ 30°C | Keep SOC at 40~60% for long term storage |
Structure
VICT designed the block type module structure to uniform the battery module size and simplify the
assembly process. Pouch cells are well held and protected in an anti-frame plastic frame block with necessary
foams for vibration absorption. Here are two of metal sheet bars on above the cells and fixed to the top of frame
block, cell tabs go through the metal bars and lay down for the laser welding to firmly attached to the metal bars
as a parallel configuration method of cells, metal bars also have screw holes for further connection among
blocks. Here are extra top lids for blocks, after blocks are assembled with bus bars and wires, the plastic lid can
be installed for isolation and protection but will not disturb the current connections and wires.
Application
- Emergency power supply
- LED light
- Electric vehicle
- Golf cart
- Lawn Mower
- Marine
- Medical equipment
- Power tool
Packing
Pouch Cell Safe Test
Workshop
Battery Pack Installation & Maintenance (For Technical Reference only)
• Please study the related data-sheet and user manual before the installation of battery pack, BMS
• Fix the battery installation location and install the battery pack under ventilation cooling environment.
• Please be careful and prevent the battery from short circuit.
• All the cables should be the standard match that can resist the related temperature and voltage.
• Please install/change the BMS under the instructions of operation manuals and make sure every part is rightly
and tightly connected. BMS install requires the right sequence of parts, please be aware.
• If the battery pack is separated, please pay attention to the connecting steps and composition way.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.