Bright Annealed sanitary stainless tubing High Toughness Ra 0.8 For Chemical
Bright Annealed sanitary stainless tubing High Toughness Ra 0.8 For Chemical
The demanding environments of the dairy, food, and beverage industries require a higher purity tubing than standard instrumentation grade. Stainless steel sanitary tubing offers a highly polished ID and OD to ensure cleanliness to prevent particulate entrapment. Spezilla a high quality stainless steel sanitary tubing featuring the superior fit and finish quality needed to ensure a problem-free system.
Markets:
Beverage
Pharmaceutical
Biopharmaceutical
Chemical
Petrochemical
Power generation
Size Range of Stainless Steel Sanitary Tubing:
Outside Diameter: 1/2" – 8"
Wall Thickness: .065" and .083"
Production Specifications :
ASTM A270/A269/A249
Surface Finish:
Bright annealed and mechanically polished.
Maximum roughness measurement of 32 Ra O.D. and 20 Ra I.D.
Packaging:
All stainless steel sanitary tubeings are shipped end capped and poly sleeved for exceptional protection.
Inspection & Tests:
Our stainless steel sanitary tubing undergoes a wide variety mechanical and non-destructive testing that meet or exceed ASTM A270/A269/A1016.
These tests include:
1. 100% Eddy current test
2. Metallographic Examination
3. Flaring test
4. Flattening test
5. Flange test
6. Reverse Bend Tests.
7. Surface roughness is measured per ASME/ANSI B46.1 requirements. These measurements are derived from four (4) readings taken at cross sections approximately 90 degrees apart.
Chemical Composition % (max.):
| (C) Carbon |
(Mn) Manganese |
(P) Phosphorus |
(S) Sulphur |
(Si) Silicon |
(Ni) Nickel |
(Cr) Chromium |
(Mo) Molybdenum |
|
| 304L | 0.030 | 2.000 | 0.045 | 0.030 | 0.750 | 8.0-12.0 | 18.0-20.0 | N/A |
| 316L | 0.030 | 2.000 | 0.045 | 0.030 | 0.750 | 10.0-14.0 | 16.0-18.0 | 2.0-3.0 |
| O.D. | Wall Thickness | Stock Lengths |
|---|---|---|
| 1/2 | .065 | 20 ft. |
| 3/4 | .065 | 20 ft. |
| 1 | .049 | 20 ft. |
| 1 | .065 | 20 ft. |
| 1 1/2 | .049 | 20 ft. |
| 1 1/2 | .065 | 20 ft. |
| 2 | .049 | 20 ft. |
| 2 | .065 | 20 ft. |
| 2 1/2 | .065 | 20 ft. |
| 3 | .065 | 20 ft. |
| 4 | .065 | 20 ft. |
| 4 | .083 | 20 ft. |
| 6 | .083 | 20 ft. |
| 6 | .109 | 20 ft. |
| 8 | .109 | 20 ft. |
Dimensional Tolerances (in.):
| Outside Diameter (O.D.) | Dimensional Tolerances | |
| Over | Under | |
| 1.000" and Smaller | 0.005" | 0.005" |
| Over 1" to 2" | 0.008" | 0.008" |
| Over 2" to 3" | 0.010" | 0.010" |
| Over 4" to < 5½", excl | 0.015" | 0.015" |
| 5½" to 8", excl | 0.030" | 0.030" |
|
8" to 12" |
0.050" | 0.050" |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.