Air Cooled L Type Finned tube in tube heat exchanger Al 1060 For Air Fin Coolers
Air Cooled L Type Finned tube in tube heat exchanger Al 1060 For Air Fin Coolers
Aluminum L-Foot Finned Tubes are typically used in applications where temperatures do not exceed about 450 degrees F, primarily in air-cooled applications. Other examples include large radiators, such as large compressor oil coolers, and other forced-draft or induced-draft air-cooled applications.
Description:
L finned tube
“L” Finned tube
Economically produced fin tube for moderate working temperature up to 150ºC
“L” finned tube relies on maximum surface contact between fin and tube which is ensured by tension forming fin strip helically around the base tube.
A considerable degree of protection is given to the tube by the base of the fin.
We can also fin Nominal bore tube from 3/8” to 1 ¼”.
Manufacturing details:
Aluminium “L” finned tube
Max. Fin Height – 22.22 mm (0.875”)
Min. Fin Height – 9.5 mm (0.375”)
Max. Fin Density – 11 FPI (433 FPM)
Min. Fin Density - 5.2 FPI (205 FPM)
Max. Tube Diam. – 38.1 mm (1.5”)
Min. Tube Diam. _ 12.7 mm (0.5”)
Max. Tube Length – 15m (49ft)
Copper “L” finned tube
Max. Fin Height – 19.05 mm (0.75”)
Min. Fin Height – 6.35 mm (0.25”)
Max. Fin Density – 11 FPI (433 FPM)
Min. Fin Density - 5.2 FPI (205 FPM)
Max. Tube Diam. – 38.1mm (1.5”)
Min. Tube Diam. _ 9.5mm (0.375”)
Max. Tube Length – 15m (49ft)
Base tube material
Carbon Steel, Stainless steel, Copper, Copper alloys, Titanium.
ASME SA 179 Specification
ASME SA 179 Carbon Steel Seamless Tubes are Low Carbon Steel Tubes with 0.06-0.18 % carbon content with combination of 0.27-0.63 % manganese. These Tubes are also known as mild steel pipes and tubes. ASME SA 179 Tubes are low-cost Tubes easy to form and shape. These pipes are manufactured as per ASME Specification and commercially referred as cs pipes or ms pipes. Low Carbon Steel Pipes are not as hard as hig carbon steel pipes,Though carburizing can increase its surface hardness.
| Specifications: | |
| Tube OD | 5/8”, 3/4”, 1”, 1-1/4” and 1-1/2″ |
| Fin Height | 3/8″, 7/16”, 1/2” and 5/8″ |
| Fin Type | Solid or Perforated |
| Fin Thickness | 0.014” to 0.016″ |
| Number of fins | 8 to 12 fin per inch |
| Fin Material | Aluminum 1100-0 or Aluminum 1060 |
| Tube Material | Generally carbon steel, stainless steel, or brass — can be any material |
| Tube Length | No practical limit |
| Applications: |
|
A wide variety of economizers and waste heat recovery units to utilize heat from boiler flue gas, gas turbine exhaust, incinerators, etc. |
|
Glycol dehydration units |
|
Fired heaters, such as LNG vaporizers, air pre-heaters, oil heaters, etc. |
|
Asphalt tank heaters |
|
Air coolers, such as compressor jacket water and lube oil coolers |
|
Lumber drying kilns, and similar applications |
|
Livestock enclosure and greenhouse heaters |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.