Seamless 2507 Super Duplex Tubing , Duplex SS Pipe 3/4 Inch XBWG14x20ft
2507 Super Duplex Stainless Steel Seamless Tube ASTM A789 3/4"xBWG14x20ft
Super Duplex 2507 Stainless Steel (UNS S32750 and UNS S32760)
Certain projects require the use of materials that provide exceptional strength and corrosion resistance. Duplex 2507 stainless steel exceeds the standard requirements of stainless steel, with a 2507 alloy that combines the benefits of chromium, molybdenum and nickel within a single steel material. Super duplex 2507 is highly useful in corrosive environments where resistance to crevice corrosion and pitting is a must. Due to these beneficial qualities, 2507 is extremely useful in a wide range of industrial applications throughout the world.
Duplex Alloy 2507 is a super duplex stainless steel with 25% chromium, 4% molybdenum and 7% nickel. It has excellent resistance to chloride stress corrosion cracking, high thermal conductivity, and a low coefficient of thermal expansion. The high chromium, molybdenum and nitrogen levels provide excellent resistance to pitting, crevice and general corrosion. The impact strength is also high. Duplex Alloy 2507 is not recommended for applications which require long exposures to temperatures above 570 °F because of the risk of a reduction in toughness.
CHEMISTRY TYPICAL
Carbon: 0.03 max
Manganese: 1.2 max
Phosphorus: 0.035 max
Sulfur: 0.020 max
Silicon: 0.80 max
Chromium: 24.00 - 26.00
Nickel: 6.00 - 8.00
Molybdenum: 3.00 - 5.00
Nitrogen: 0.24 - 0.32
Copper: 0.50 max
Iron: Balance
PHYSICAL PROPERTIES
Density: 0.28 lbs/in3 7.75 g/cm3
Thermal Conductivity: BTU-ft/hr/ft2/°F (W/m-° K):
At 68 - 212 °F (20 - 100 °C): 9.0 (17.0)
Mean Coefficient of Thermal Expansion: in/in/°F (µm/m•K):
32 - 212 °F: 7.2 x 10·6 (13)
Modulus of Elasticity: ksi (MPa):
29 x 103 (200 x 103) in tension
Melting Point: 2570 - 2660 °F (1410 - 1460 °C)
Specifications:
S32750 Standard Specification:
| Standard | ASTM A789, ASME SA789 |
| Equivalent Standards | DIN 17458, GOST 9941-81, GOST 9940-81, EN 10216-5, ASTM A790, ASME SA790, DIN 17456 |
| Material | S32750 |
| Equivalent Materials | X2CrNiMoN25-7-4, 1.4410, 2507, F53 |
| Related Products | stainless steel tube, stainless steel pipe, heat exchanger steel tube, ASTM A789 |
Features
- High resistance to chloride stress corrosion cracking
- Chloride pitting and crevice corrosion resistance superior to 317L stainless
- Good general corrosion resistance
- High strength
- Good sulfide stress corrosion resistance
- Useful up to 600°F
Applications
- Chemical process vessels, piping, and heat exchangers
- FGD scrubber systems
- Pulp mill digesters, bleach washers, chip presteaming vessels
- Food process equipment
- Oil field piping, heat exchangers
ASTM A789 S32750 (2507) Stainless Steel Tubes Chemical Composition
| C % | Si % | Mn % | P % | S % | Cr % | Ni % | Mo % | N % | Cu % |
| 0.03 max | 0.8 max | 1.2 max | 0.035 max | 0.02 max | 24.0-26.0 | 6.0-8.0 | 3.0-5.0 | 0.24-0.32 | 0.50 max |
ASTM A789 S32750(2507) Stainless Steel Pipe Mechanical Properties
| Tensile Strength, Mpa | Yield Strength, MPa | Elongation, % | Hardness, HB |
| 800 min | 550 min | 15 min | 310 max |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.