45 Ton No Power Trackless Transfer Trailer

No Powered trailers do not rely on any power. You need to pay attention to the following points when using them:
1. Choose the right hook. Make sure the hitch is installed securely to avoid it falling during towing.
2. Communication and cooperation between front and rear vehicles. Establish a reasonable driving route, avoid complex and congested road sections, and agree on communication signals for starting, slowing down, turning, going up and down slopes, etc.
3. Control the safe distance. Keep the distance between vehicles at least 10 meters and control the vehicle speed below 20 km/h to prevent accidents.
4. Pay attention to the status of the vehicle. The towed vehicle should remain activated so that steering and brake assist can be used at any time.
5. Coping with curves on slopes. On a downhill section, if the slope is long, you can untie the rope and let the vehicle slide down; if the slope is short, you can hang the rope and go downhill, but the vehicle in front should not brake easily. At curves, you should turn on your lights in advance and pass in a large circle to avoid sudden braking.

Precautions when parking. When parking, the towed vehicle should be stopped first and then the towing vehicle to prevent the towed vehicle from stopping early and causing the towing rope to break.

Its design meets practical application needs and can meet the requirements of various working scenarios. We believe that the no powered trailer will be a powerful assistant in your work, bringing convenience and efficiency to your work.