IEC 61851-1 Stainless Steel IPXXD Test Rob Probe D With 3 N Force
IEC 61851-1 Stainless Steel IPXXD Test Probe With Force
Product overview:
This rod probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against access with a wire.
Technical parameters:
| Model | SN2210-4 | SN2210-4T (Optional) |
| Name | Test rod probe D | Test rod probe D with force |
| Test Wire Diameter | Ф1+0.05 0 (mm) | Ф1+0.05 0 (mm) |
| Stop Face Diameter | SФ35±0.2 (mm) | SФ35±0.2 (mm) |
| Handle Diameter | Ф10 (mm) | Ф10 (mm) |
| Test Wire Length | 100±0.2 (mm) | 100±0.2 (mm) |
| Handle Length | 100 (mm) | ---- |
| Built-in Force | N/A | 3N force |
Applicable standard
This probe conforms to the standard requirement of IEC61032 figure 4 test probe D, it is required by IEC 61851-1 clause 8 and 12.4, IEC 60335-1 clause 22.1, IEC60529 for IP4, IEC60065 and etc.
Customizable
It can be used for anti-electric shock test when equipped with alligator clip. Or used for enclosure protection test when open threaded hole of M6 at the end of the handle (connected with a pull and push force gauge). The probe whose model number with "T" is with built in force.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.