IEC 60068-2 Lithium Battery Explosion Proof High And Low Temperature Test Chamber
IEC 60068-2 Lithium Battery Explosion Proof High And Low Temperature Test Chamber
Standards For Lithium Battery Explosion Proof High And Low Temperature Test Chamber:
IEC60068-2-1:2007 “Environmental Testing-Part 2-1: Tests-Test A: Cold, IDT”
IEC60068-2-2:2007 “Environmental Testing-Part 2-1: Tests- Test B-Dry heat, IDT”
IEC60068-2-78:2012 “Environmental Testing-Part 2-78: Tests-Test Cab: Damp heat, steady state, IDT”
IEC60068-2-30:2005 “Environmental Testing-Part 2-30: Tests-Test Db: Damp heat, cyclic (12h+12h cycle), IDT”
Product overview For Lithium Battery Explosion Proof High And Low Temperature Test Chamber:
This series of products are suitable for aerospace products, information electronic instruments, materials, electricians, vehicles, metals, electronic products, and various electronic components in high and low temperature or humid and hot environments, testing their performance indicators and quality management purposes. The high and low temperature damp heat test box, also known as artificial simulated environment test box, is used to test the heat resistance, cold resistance, dry resistance and temperature resistance of various materials. Suitable for quality management of plastic products, electronics, electrical appliances, food, vehicles, metals, chemicals, building materials and computers.
Technical Parameters For Lithium Battery Explosion Proof High And Low Temperature Test Chamber:
| Volume and Size | |
| Volume | 225L |
| Test inner box size | 600×500×750 mm (D×W×H) |
| Device size | About 850×1550×1710 mm (D×W×H) |
| Specimen Limit | This test equipment prohibits the test of flammable, explosive and volatile substances samples; the test of stored corrosive substances, the test of stored organisms, the test and storage of samples of stored strong electromagnetic emission sources |
| Main performance technical parameters | |
| Functional requirements |
1. (Air) test space cooling, heating, humidification, dehumidification; 2. According to the temperature and humidity settings, the test space reaches the set temperature and humidity 3. Each function can be operated independently |
| Test environmental conditions | The ambient temperature is +25℃, the relative humidity is less than or equal to 85%, and there is no sample in the test box |
| Temperature and humidity range | |
| Temperature range | -70℃～+180℃ |
| Humidity range | 20%～98% R.H |
| Test area heating and cooling time | |
| Heating time | -70℃～+180 ℃ ≤120min |
| Cooling time | +20℃～-70 ℃ ≤90min |
| Control precision | |
| Temperature fluctuation | ±0.5℃ |
| Temperature deviation | ±2.0℃ |
| Evenness | ±2.0℃ |
| Relative Humidity Deviation | ±3.0%RH (when humidity>75%RH) ±5.0%RH (when humidity≤75%RH) |
| Structure | |
| Outer chamber material | Electrolytic plate spray treatment |
| Internal chamber material | SUS#304 stainless steel. (spray insulating paint) |
| Box insulation material | Rigid polyurethane foam + glass fiber |
| Door insulation | Rigid polyurethane foam + glass fiber |
|
Air conditioning channel |
Centrifugal fan, heater, evaporator (also dehumidifier), water supply and drainage outlet, humidifier, dry burning preventer, dry and wet bulb overtemperature sensor, wet bulb water tank |
| Cooling method | Forced convection air-cooled |
| Water supply method | Pump lift |
| Heater | U-TYPE adopts imported stainless steel SUS#304 to make electric heating tube heater |
| Humidifier | The humidification barrel is made of SUS#304 stainless steel, and is equipped with a water level observation window and a water level solenoid valve |
| water supply location | Front lower fixed water tank for easy water supply |
| Storage tank volume | 25L |
| Water quality requirements | Resistivity≥500Ω·m |
| Maximum power | 18KW |
| Maximum current | 32A |
| Requirements for storage environment |
The ambient temperature of the equipment should be kept within 0℃～+35℃ When the ambient temperature is lower than 0°C, (the equipment has been stopped for a long time), the water retained in the equipment should be drained to prevent the water in the pipeline from freezing and swelling and damaging the pipeline. |
| Weight | About 900 kg |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.