IEC 62133 Lithium Battery Test System with Explosion Proof Chamber
IEC 62133 Lithium Battery Test System with Explosion Proof Chamber
Product information For Lithium Battery Test System with Explosion Proof Chamber:
Battery overcharge and over-discharge explosion-proof box is mainly used for battery overcharge and over-discharge, charge and discharge test, the battery is placed in the explosion-proof box, external charge and discharge test equipment, the operator and the instrument for protection.
Technical Parameters For Lithium Battery Test System with Explosion Proof Chamber:
| Equipment size |
Test chamber size per layer: 500*500*500 (D*W*H),( Three zones structure, can be customized. Outer box size: 710*780*2060mm (W*D*H) |
| Equipment Material |
Outer box: 1.5MM thick cold-rolled plate and high-temperature double-sided baking paint treatment. Inner box: SUS # 304 stainless steel, thickness 1.00MM thick. |
| Box load-bearing capacity | The bottom load capacity is not less than 150KG, the second/third layer load capacity is not less than 50KG |
| Equipment box door |
Single door, double door, inner box door is made of stainless steel, and add silicone strip to tighten, open visual observation window on the front The door is connected to the box by strong hinges, while each door adds an explosion-proof hinge, the right end of the chain is fixed in the latch side to prevent the explosion-proof box and door separation, effectively protecting the safety of testers |
| Observation Window | Double tempered glass, tempered glass thickness of 10MM, double tempered glass between the addition of steel wire grid in the explosion can do traction, while preventing the glass explosion when the glass splash injury testers situation. Observation window sealing using 3M glass adhesive for sealing |
| Box protection | The test chamber is fully laminated with Teflon tape inside to effectively prevent corrosion, insulation, flame retardant and easy to clean. |
| Wire loading port | Each layer of the box on the left and right sides of each open a round loading line mouth, Ф50MM diameter, easy to test the connection line through |
| Exhaust | Each layer of the box back are installed with exhaust fans and leave the exhaust guide (diameter 100MM), can be connected to the laboratory powerful extraction fan |
| Lighting |
Each layer of the box is installed with lighting device, convenient to observe the specimen. Individual test panels to control lighting and exhaust in each test chamber. |
| Heat insulation protection | Insulation design between each layer can avoid mutual influence test. |
| Weight | Approx 200kg |
| Power supply | AC 220V±10%, 50Hz |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.