IEC 62196-1 2022 Gauges For Testing Insertability Of Round Unprepared Conductors
IEC 62196-1: 2022 Gauges For Testing Insertability Of Round Unprepared Conductors
Product Overview For Gauges For Testing Insertability Of Round Unprepared Conductors:
The gauges conform to IEC 62196-1:2014 clause 13.2.1 figure 6 table 7, IEC 62196-1:2022 clause 13.2.1 figure 11 table 2.
They are used to verify the screw type terminals shall allow the proper connection of copper or copper-alloy conductors having nominal cross-sectional areas as shown in Table 2 of IEC 62196-1:2022.
Technical parameters For Gauges For Testing Insertability Of Round Unprepared Conductors:
Total 16 pcs.
Made of steel, with nylon handle.
The dimensions and shapes are made according to following standard figure and table:
|
Flexible mm2 |
Rigid (solid or stranded) mm2 |
Diameter a mm |
Tolerances for a mm |
| 1.5 | 1.5 | 2.4 |
0 -0.05 |
| 2.5 | 4 | 2.8 |
0 -0.05 |
| 4 | 6 | 3.6 |
0 -0.06 |
| 6 | 10 | 4.3 |
0 -0.06 |
| 10 | - | 5.3 |
0 -0.06 |
| 16 | 25 | 6.9 |
0 -0.07 |
| 50 | 70 | 12.0 |
0 -0.08 |
| 70 | - | 14.0 |
0 -0.08 |
| - | 150 | 18.0 |
0 -0.08 |
| 150 | 185 | 20.0 |
0 -0.08 |
| 185 | 240 | 25 |
0 -0.08 |
| 240 | 300 | 28 |
0 -0.08 |
| 300 | 400 | 28.5 |
0 -0.08 |
| 400 | 500 | 33 |
0 -0.08 |
| 500 | 630 | 37 |
0 -0.08 |
| 630 | 800 | 41 |
0 -0.08 |
|
Maximum cross-section of conductors and corresponding gauges. Material: steel |
|||
Screw type terminals shall allow the proper connection of copper or copper-alloy conductors having nominal cross-sectional areas as shown in Table 1.
For terminals other than lug terminals, compliance is checked by the following test and by the tests of 13.3.
Gauges as specified in Figure 11, having a measuring section for testing the insertability of the maximum specified cross-sectional area of Table 1, shall be able to penetrate into the termina aperture, down to the designated depth of the terminal, under their own weight.
Screw type terminals that cannot be checked with the gauges specified in Figure 11 shall be tested by suitably shaped gauges, having the same cross-section as those of the appropriate gauges given in Figure 11.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.