Axial Force Of Edson Caps Test Equipment IEC 62560 Luminaries Test Equipment
Axial Force Of Edson Caps Test Equipment IEC 62560 Luminaries Test Equipment
Product information:
The test equipment is designed and manufactured according to IEC 62560 clause 9.4. It is used for checking the axial strength of the Edison cap.
Technical parameters:
| Samples and restrictions | Edison lamp cap |
| Test purpose | Used to detect the mechanical strength of caps of Edsion lamps. |
| Test principle |
Use a motor-driven pressure plate to apply a certain pressure to the center of the lamp cap, so that the test lamp cap exerts force vertically along the axis of the fluorescent lamp until the force reaches a constant value for 1 minute and then released.
|
| Structure and features | Single-arm force applying mechanism, force value can be set, LCD screen operation and display |
| Power supply | AC220V,50Hz |
| Main performance indicators | |
| Test station | Single station |
| Electrical control method | LCD interface operation and display, with force value curve |
| Drive mode | Motor driven |
| Specimen clamping method |
Mechanical clamping, the clamping point position is adjustable
|
| Force apply range | 0-500N, resolution 0.1N, accuracy 1%F.S. It can achieve achieve 80N and 120N required by IEC62560:2015. |
| Test gauge |
7006-6-1,7006-27H-1,7006-27F-1,7006-27B-1,7006-27-7, each one piece Accordingly following table:
|
| force application speed | 0-300mm/min |
| Stroke | 0-500mm,resolution: 0.01mm |
| Result display | With force value-time curve, the test results can be output through a micro printer |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.