IEC 62368-1 Annex U Cathode Ray Tubes Mechanical Strength And Explosion Proof Test Apparatus
IEC 62368-1 Annex U Cathode Ray Tubes Mechanical Strength And Explosion Proof Test Apparatus
Product information:
Standard:Confirm to IEC 62368-1:2018 Annex U, IEC 60950-1:2013 clause 4.2.8, IEC60065:2014 clause 18.2, IEC61965, etc.
Application:For screen size more than 16cm of the cathode ray tubes anti explosion impact and mechanical impact verification, or explosion of the cathode ray tubes protecting verification to the equipment enclosure.
Test sample:For screen size more than 16cm of the cathode ray tubes and other test equipment.
Feature:The cathode ray tube is installed on the test chamber, the test chamber should be placed in a support level with height above the surface of 75cm±5cm, there should be no fragment more than 2g after testing each cathode ray tube, it is placed on the ground from the tube surface projection with 500mm, high 250mm of the baffle, and there should be no any fragment flying on the same baffle at 2000mm.
Technical parameters:
| Applied standard | IEC 62368-1 |
| Applied clause | Annex U |
| Material | Use aluminum alloy material, with beautiful appearance |
| Accessory | Equip with diamond scratch pin |
| Support level | 750mm±50mm |
| Test baffle | W500mm*H250mm |
| Scratch area | Diameter of 20mm |
| Range of steel ball | Ø40mm,500g |
| Steel wire rope | ø0.6-0.8 |
| Test contents | Mechanical strength test (small ball impact test), explosion test (emission shock), high energy impact test |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.