Clause 16.16 EV Withdrawal Force And Latching Verification Test Equipment
IEC 62196 Clause 16.16 Electric Vehicle Withdrawal Force and Latching Verification Test Equipment
Product Information:
It is designed and manufactured according to the standard requirements of IEC 62196-1:2020 clause 16.16, and etc.
The fixed accessory (the socket-outlet or vehicle inlet) is mounted such that the mating accessory moves vertically downward into it during the first stage of insertion. A principal weight of 9,2 kg is suitably placed on the mating accessory. If the moving accessory does not enter the fixed accessory to the position required, a supplementary weight of 0,8 kg is allowed to fall from a height of 5 cm onto the principal weight. The moving accessory shall then enter the fixed accessory to the position required to engage the contacts properly.
Technical Parameters:
| Applied standard | IEC 62196-1 |
| Applied clause | 16.16 |
| Insertion force test | |
| A fixed insertion force device for socket or appliance input socket | |
| Force weight kit | 9.2kg, auxiliary weight 0.8kg |
| Drop height limit of auxiliary weight | 50mm |
| 2kg weight | |
| Withdrawal force test | |
| Shared the mechanical part of SN1013, based on IEC 62196-1 :2020 Figure 13 | |
| Shared the test plugs for SN1013 | |
| Counterweight, make the lifting accessories (gauge + hook + weight) to be 9kg, and the supplemental weight is 1kg | |
| 1kg weight | |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.