70Mpa Wellhead And Christmas Tree Equipment 3 1/16"X2 1/16"-10M PR1 PSL3 EE
The X'mas Tree is composed by following equipments:
Tubing Head Section:
Tubing Head: 7 1/16"x10000psi BX156 Flanged Top x 11"x1000psi BX-158 Flanged Bottom including 24sets 1 1/2" x 11 3/4" Stud and Nut(A193 B7 and A194 2H), Equipped with 7"x4 1/2" NEW VAM x4" H type BPV tubing hange, 6 5/8" BT Pack off seal.
Two outlet 2 1/16" x10000psi Studded with 3 gate valves, Manual type, C/w 1/2" NPT pipe plug, 1/2" NPT needle valve and Pressure gauge.
Tubing Head Adapter
3 1/16"-10000psi x 7 1/16"-10000psi with bottom preparation for tubing hanger 7"x2 7/8" NEW VAM x 2 1/2" H type BPV.
Lower Master Valve
3 1/16"-10000psi Manual type FC gate valves-1set
Upper Master Valve
3 1/16"-10000psi Manual type FC gate valves-1set
Swab(Crown) Valve
2 1/16"-10000psi Manual type FC gate valves-1set
Wing Valve
2 1/16"-10000psi Manual type FC gate valves-1set
Studded Cross 3 1/16"-10000psi x 2 1/16"-10000psi
H2 Type adjustable Choke valve- 2 1/16"-10000psi, 1" Choke maximum.
Test Stump Complete
Type H 2-way check valves and back pressure valve for tubing hange.
Running and retriveing tools set for type H BPV and 2 way check valve.
| Additional material | |
| Lubricator 20000 PSI, 4 1/16 "API 20000 PSI flange, for mounting and dismounting the back pressure valve. | 1 |
| Lubricator 20000 PSI, 2 1/16 "API 20000 PSI flange, for installing and removing the plug to remove the valve. | 1 |
| Backpressure valve (check valve) 4" nominal C.I.W. type 'H'. Material: INCONEL 718 |
1 |
| Test plug Material: INCONEL 718 |
1 |
| Two-way check valve 4 "C.I.W. type 'H'. Material: INCONEL 718 |
1 |
|
Check valve, 1.9" VRP thread for gate valve 2 1/16" API 10000 PSI Material: AISI4130 |
1 |
|
Check valve tread VRP 2" for gate valve 2 1/16" API 15000 PSI Mat.: AISI4130 |
1 |
| Key Parmelee for the tool type "H". | 1 |
| Connecting flange for installation of valve reverse thread VRP for gate valve 2 1/16" API 10000 PSI | 1 |
| Connection flange for the installation of a check valve VRP thread for 2 1/16 "valve API 15000 PSI | 1 |
| Type "H" tool completion (lubricator unit) 10000 PSI, 2.1 / 16 "API 10000 PSI flange, for installing and removing the plug for removing valves, stroke 72". | 1 |
|
Blind flange 2 1/16 "API 10000 PSI, female thread tubing 2.1 / 2" Material: forged low alloy steel API 60K-HRC 22 max. |
1 |
| Adapter for tools valve back pressure type 'H'. | 1 |
| Quick coupling for attaching the valve mounting / dismounting tool BPV | 1 |
| Check valve 2" | 1 |
| Check valve 1,9" | 1 |
| Manual hydraulic pump for testing 20000 PSI | 2 |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.