High Efficiency 20TPH Dry Mortar Mix Plant For Decoration Projects
China Manufacturer High Efficiency Dry Mortar Mix Plant
Dry powder mortar refers to a granular or powdery mixture of aggregates (such as quartz sand), inorganic cementing materials (such as cement), and additives (such as polymers) that have been dried and screened in a certain proportion. , The materials can be used directly after being transported to the construction site in bags or bulk, and mixed with water. Dry mortar is used as a thin layer to play the role of bonding, liner, protection and decoration in the construction industry, and it is widely used in construction and decoration projects.
Classification of dry mortar:
In the conventional sense, it is divided into two categories: special and ordinary.
Common ones include masonry, plastering, ground mortar,
Specialty includes anti-cracking mortar, interface mortar, bonding mortar, etc.
| Model | CM1200 | CM2000 | CM3000 | CM4500 | CM6000 | note |
| capacity(t/h) | 10-20 | 20-40 | 40-60 | 60-80 | 80-120 | |
| main machine | CMD1200 | CMD2000 | CMD3000 | CMD6000 | CMD4500 | |
| power(kW) | 30 | 37 | 55 | 75 | 110 | |
| high speed end | two-pole (7.5kW),four-pole(5.5kW)(optional) | two-pole (7.5kW),four-pole(5.5kW)(optional) | two-pole (7.5kW),four-pole(5.5kW)(optional) | two-pole (7.5kW),four-pole(5.5kW)(optional) | two-pole (7.5kW),four-pole(5.5kW)(optional) | |
| volume fraction of mixer | 70% | 70% | 70% | 70% | 70% | |
| aggregate size (mm) | 0~4.75 | 0~4.75 | 0~4.75 | 0~4.75 | 0~4.75 | |
| aggregate scale(kg) | (200~1300)±1% | (200~2200)±1% | (400~3000)±1% | (400~3800)±1% | (500-5800)±1% | adjustable according to client's requirement |
The non-gravity mixer barrel is equipped with dual-axis reverse optional blades. The blades overlap and form a certain angle. The rotation of the blades throws the material to the space flow layer, causing instantaneous weight loss and falling into each other's area. The materials are mixed back and forth, and the shaft moves radially to achieve uniform mixing.
Has the following advantages:
1. Multi-angle cross mixing, leaving no dead corners
2. Dynamic manual sampling port for easy sampling
3. The blades are made of wear-resistant cast steel with long life
4. Double large door opening device, unloading quickly and cleanly.
Good dispersibility: the unique structural design inside the mixer can effectively disperse polypropylene fibers and wood fibers, completely solving the problems of segregation and fiber secondary agglomeration caused by different specific gravity of materials
Wide range of application: This equipment can meet the production needs of dry mortar with different performance requirements, such as: masonry mortar, plastering mortar, mortar required for thermal insulation system, decorative mortar and other dry mortars
High cost performance: For the production project of decorative mortar for external wall insulation boxes, not only the investment is low, the benefit is high, but the idle equipment and resource waste caused by excessive investment are avoided
Simple and convenient to use: The equipment has a small floor area, low energy consumption, easy operation, with an output of 3-8 tons per hour and 3-6 workers.
The air box pulse bag filter has the following advantages:
1). The dust removal efficiency can reach 99.9%, and the dust emission can be controlled below 30mg/Nm3.
2). Advanced sealing measures, the air leakage coefficient is less than 2%. It can handle high-concentration dust below 100g/Nm3.
3). Advanced structural design, large filtration area per unit volume, and small equipment volume.
4). The cleaning method is unique and effective, prolonging the service life of the filter bag. The key parts are of reliable quality and long service life.
5). Stable performance, high degree of automation, simple daily maintenance and management.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.