HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
                                                                                                           
Verified Supplier
14 Years
Since 2012
Menu

IEC 60529 Vertically Falling Water Drops IP Test Equipment For IPX1 IPX2

Price Negotiable
Price: Negotiatable
MOQ: 1 Set
Delivery Time: 30 days
Brand: HeJin
Product Description

IEC 60529 IP Test Equipment Vertically Falling Water Drops For IPX1 IPX2

 

Standard:

IEC 60529 Degrees of protection provided by enclosures (IP Code) clause 14.2.1 Test for second characteristic numeral 1 with the drip box and clause 14.2.2 Test for second characteristic numeral 2 with the drip box and figure 3. IEC 60598-1 clause 9.2.3.

 

Test sample:

Electronic appliances, lamps, electrical cabinets, electrical components, car, motorcycle, electrical products (such as automotive instrument, all kinds of switches, micro motors, etc.). IP Test Equipment

 

Feature:

The frame is fixed on the wall to ensure the stable operation of the drip box; the screw lifting device has low resistance and controls the drip box to rise and fall smoothly; equipped with an infrared sensor, the dripping distance is accurate, and meets the standard requirements.

 

Parameters:

Item Parameter
Input power Single-phase AC220V,50Hz
Water supply Water flow rate>10L/min±5% clean water without inclusion. This device is equipped with clean water filtration unit
Control and operation PLC intelligent control, 7 inch color touch screen operation
Testing time 0-999.9min
Water tank size Outline dimension: WDH=1100×800×350mm, fully enclosed water tank, SUS304 material
Drip test area 1000×600mm, customizable
Drip height 200mm, adjustable
Dripping rate (Water flow)

1+0.05 0mm/min or 3+0.05 0mm/min switchable, adopt digital controlled rainfall technology

Needle hole Φ0.4mm
Distance between holes 20mm
Rotary table Diameter: Φ600mm Rotating speed1r/min. Can be paused 150s at four aspects, Load bearing≤150kg electrical equipment
Supporting sample 15°bevel
Water tank lifting drive Motor drive, screw guide rail to ensure the stable lifting and self-locking
Installation method Wall mounted or floor type
Site requirements

Dedicated IP waterproof test room, The ground should be flat with illumination

10A waterproof leakage switch(or socket)used for equipment. With good function of inflow and drainage. Ground installation

Area covered The size can be set according to customer’s requirement

 

Get in Touch

Have questions about our products or want to discuss a custom order? Our team is ready to help you.

Company HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
Location No.6-36, Yaogu Farm, Shibi No.3 Village, Shibi Street, Panyu District, Guangzhou, Guangdong, China
Contact Person Tessa Huang

Request A Quote

Please check your email address.
Your message must be at least 20 characters.