Product description
1x32 Multi Channel Single mode and Multimode Optical Switch fiber optical switch
Any 1xN configuration, Any fiber type, Wide band working wavelength, 1x32 Multi Channel optical switch is a kind of light path control equipment,can realize multi-channel fiber optic light path switching,In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its component test, outdoor cable test and multi-port optical sensors monitoring system.
Feature
1.a kind of functional component, with the ability of switching optical route.
2. 1 input and N output fiber ports that selectively transmits, redirects,
3.or blocks optical power in a fiber optic transmission line.
4. bi-directional and can be used in either the 1xN or Nx1 direction.
5. designed for use in optical fiber communication networks and measurement instruments.
![]()
![]()
![]()
![]()
Specification
| Parameter |
Unit |
1x4 |
1x8 |
1x12 |
1x16 |
1x24 |
1x32 |
1x64 |
1x128 |
| Wavelength Range |
nm |
1260~1650 |
| Testing Wavelength |
nm |
1310/1550 |
| Insertion Loss (Typical) |
dB |
0.5 |
0.5 |
0.5 |
0.5 |
0.5 |
0.5 |
0.5 |
1.0 |
| Insertion Loss (Max) |
dB |
≤0.8 |
≤0.8 |
≤1.0 |
≤1.0 |
≤1.0 |
≤1.0 |
≤1.0 |
≤1.2 |
| Return Loss |
dB |
SM ≥ 50 |
| Crosstalk |
dB |
≤-70 |
| PDL |
dB |
≤0.05 |
| WDL |
dB |
≤0.20 |
| TDL |
dB |
≤0.20 |
| Repeatability |
dB |
≤0.02 |
| Lifetime |
times |
>107 |
| Switching Time |
ms |
≤10 (Adjacent Channel) |
| Optical Power |
mW |
≤500 |
| Control Mode |
/ |
TTL or Customized |
| Operating Temperature |
℃ |
-10~+55 |
| Storage Temperature |
℃ |
-40~+85 |
| Module type Dimensions |
mm |
135x64x32 |
135x60x37 |
184x78x66 |
184x156x66 |
Ordering Information OSW-XxX-X-XX-X-XX-XX-XX-XX
| OSW |
Mode |
Wavelength |
Package |
Fiber Type |
Fiber Diameter |
Fiber Length |
Connector |
|
1x4
1x8
1x16
1x32
1x64
1x128
S=Specity
|
S=SM
M=MM
|
85=850nm
13=1310nm
15=1550nm
85/13=850/1300
13/15=1310/1550nm
S=Specify
|
B=Metal Box
S=Specify
|
M5=50/125
M6=62.5/125
S9=9/125
S=Specify
|
25=250um
09=900um
S=Specify
|
05=0.5m
10=1.0m
S=Specify
|
00=None
FP=FC/UPC
FA=FC/APC
SP=SC/UPC
SA=SC/APC
LP=LC/UPC
LA=LC/APC
S=Specify
|
PIN Configurations
DB-9 male connector (1xN≤16) Optical Switch
| DB-9 male connector |
| Pin No. |
I / O |
Signal |
Description |
| 1 |
Input |
D0 |
D0~ D3 is channel selection Bit0~Bit3,D0 is low, D3 is high
|
| 2 |
Input |
D1 |
| 3 |
Input |
D2 |
| 4 |
Input |
D3 |
| 5 |
Input |
RESET |
TTL, Low level reset to channel 0. High level means channel selection bits are effective. |
| 6 |
Out |
READY |
TTL, Ready (High=Not ready, Low=Ready) |
| 7 |
Out |
ERROR |
TTL, Error OR Failure , (High=Error, Low=No error) |
| 8 |
Power |
GND |
Ground |
| 9 |
Power |
VCC |
5.0±5% VDC Power Supply (max 500mA)
|
DB-15 male connector (1xN≤128) Optical Switch
| DB-15 male connector |
| Pin No. |
I / O |
Signal |
Description |
| 2 |
Input |
D0 |
D0~ D5is channel selection Bit0~Bit4,D0 is low, D4 is high
|
| 3 |
Input |
D1 |
| 4 |
Input |
D2 |
| 5 |
Input |
D3 |
| 6 |
Input |
D4 |
| 10 |
Input |
D5 |
| 11 |
Input |
RESET |
TTL, Low level reset to channel 0. High level means channel selection bits are effective. |
| 7 |
Out |
READY |
TTL, Ready (High=Not ready, Low=Ready) |
| 8 |
Out |
ERROR |
TTL, Error OR Failure , (High=Error, Low=No error) |
| 1,9 |
Power |
GND |
Ground |
| 12 |
Power |
VCC1 |
5.0V±5% VDC motor power (max 950mA) |
| 15 |
Power |
VCC2 |
5.0V±5% VDC Drive circuit power(50mA) |
| 13,14 |
|
NC |
NC |
Shipping
![]()
Q1:Can I have a sample order? What is your MOQ?
A1:Sample order is welcome to test and check quality. We don't MOQ, 1pcs sample is available. Also Mixed samples are acceptable.
Q2: What's the Lead time?
A2: The normal lead time is about 1week, For big quantity and special products. Please check lead time with our sales representative. But we keep stock for some products, could ship 1-3 days after receiving payment.
Q3: What are the payment terms?
A3: Payment term: T/T, Paypal, Western union,cash payment, ALI etc.
Q4: What is your warranty time
A4: 3 years' warranty.
Q5: Could I use our own logo, label and package?
A5: Yes, we could provide OEM service which according to your requirements, design products label, logo, PN, SN, package.
