GU Shear Up Adaptor Wireline Pulling Tool QLS Connection
GU Shear Up Adaptor Wireline Pulling Tool
I. Introduction
GU Shear Up Adaptor is used in connection with GS pulling tool, and they form GR Pulling Tool.
II.Technical parameters of common specifications
| Szie | Actual OD | FN | Fishing OD | Connection | Lower connection thread |
| 2″ | 1.81″ | 1.375″ | 1.38″ | 15/16″-10UN | 1/2-13UN″ |
| 2.5″ | 2.25″ | 1.375″ | 1.81″ | 15/16″-10UN | 5/8-11UN″ |
| 3″ | 2.72″ | 1.75″ | 2.31″ | 1-1/16″-10UN | 5/8-11UN″ |
| 3.5″ | 3.11″ | 2.313″ | 2.62″ | 1-1/16″-10UN | 5/8-11UN″ |
Technical parameters can also be according to user requirements
III. Note:
1. When assembling, the threads must be coated with grease;
2. External burrs or scratches of all parts shall be leveled with a file.
IV.Maintenance
1. After the tool is disassembled, check the damage of each component and replace the damaged parts.
2. When assembling, apply a thin layer of grease on the thread surface.
3. After assembly, the fishing neck is attached with thread protector and marked for later use.
Welcome to contact us at any time.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.