Silicon Carbide Heating Elements Application

It can be widely used in such applications as

1. Sintering and heating elements of ceramics

2. Magnet

3. Glass

4. Metallurgy

5. Refractory

Silicon Carbide Heating Elements Feature

Withstands high temperature up to 1600℃

High strength and excellent shock resistance

Heat source without noise and air pollution

Anti-oxidation, anti-corrosion,small deformation, long life

Convenient installation and maintenance

The following should be given when describing an ED type of SiC heater:

• Type: ED (Equal Diameter);

• OD: Outer Diameter;

• HZ: Hot Zone;

• CZ: Cold Zone;

• OL: Overall Length;

• Resistance; Ohms (Ω)

Examples: Type ED with 54mm-OD, 1600mm-HZ, 400mm-CZ, 2400mm-OL, Resistance 0.90Ω

Specified as;

ED, OD /Hot Zone length/Overall length/resistance

ED 54/1600/2400/0.90

Silicon Carbide Heating Elements application :

Silicon Carbide Heating Elements is extensively used in the fields of metallurgy ,ceramics, glass ,machinery,analysis test semiconductor science and research

Advices of using heaters silicon carbide sic heating element:

1) In order to keep furnace temperature and the charges uniform of each element, before installation resistance distribution must be carried.

2) As the element is very brittle, be careful while install and maintain to avoid any damage.

3) When start to operate the furnace, raise voltage slowly and gradually, never give full load at one time.