U Type 1600℃ Silicon Carbide Heater SiC Heating Elements
U Type 1600℃ Silicon Carbide Heater SiC Heating Elements
U Type 1600C Silicon Carbide Heater Introduction
U Type 1600C Silicon Carbide Heater is manufactured by taking two carefully-matched SiC rods and welding a thickened silicon carbide bridge. This element provides for wiring both tail ends from one side of the furnace. The tail ends of the cold ends are metallized with aluminum, which can provide a low-resistance contact surface to the aluminum connection straps and clamps.
Since U-shaped silicon heating element is composed of two ED silicon heating elements sharing a cold end, it can be connected by the power cord at one end of the furnace. The surface temperature of heating part is 1500. It is mainly used in kilns with high furnace temperature and high temperature uniformity. Its characteristics are electricity saving and long service life.
U Type 1600C Silicon Carbide Heater Parameters
Type: U-Shaped;
Outer diameter (OD): mm, Overall length (OL): mm, Hot zone length (HZ): mm, Cold end length (CZ): mm, Shank spacing (A): mm
Example: U Type, OD=20mm, HZ=300mm, CZ=400mm, OL=700mm, A=60mm, Resistance2.24Ω
Specify as: U Shaped,20/300/700/60/2.24Ω
|
Outer Diameter (OD, mm) |
Hot zone (HZ, mm) |
Cold zone (CZ, mm) |
Overall length (OL, mm) |
Range of resistance (ohms) |
|
8 |
100-300 |
60-200 |
240-700 |
2.1-8.6 |
|
12 |
100-400 |
100-350 |
300-1100 |
0.8-5.8 |
|
14 |
100-500 |
150-350 |
400-1200 |
0.7-5.6 |
|
16 |
200-600 |
200-350 |
600-1300 |
0.7-4.4 |
|
18 |
200-800 |
200-400 |
600-1600 |
0.7-5.8 |
|
20 |
200-800 |
250-600 |
700-2000 |
0.6-6.0 |
|
25 |
200-1200 |
250-700 |
700-2600 |
0.4-5.0 |
|
30 |
300-2000 |
250-800 |
800-3600 |
0.4-4.0 |
|
35 |
400-2000 |
250-800 |
900-3600 |
0.5-3.6 |
|
40 |
500-2700 |
250-800 |
1000-4300 |
0.5-3.4 |
|
45 |
500-3000 |
250-750 |
1000-4500 |
0.3-3.0 |
|
50 |
600-2500 |
300-750 |
1200-4000 |
0.3-2.5 |
|
54 |
600-2500 |
300-750 |
1200-4000 |
0.3-3.0 |
U Type 1600C Silicon Carbide Heater Features
- withstands as high as 1600°C
- high strength and excellent shock resistance
- heat source is free of noise and air pollution
U Type 1600C Silicon Carbide Heater Application
Silicon carbide SiC rod heating element is widely used in various high temperature electric furnaces and other heating devices, such as in the industries of magnet, ceramics, power metallurgy, glass, metallurgy and machinery, analysis test, semiconductor, science &
research and so on.
How to order ? Pls provide this informations:
1 Type: rod, U, W, H, spiral and double-spiral types
2 OD,HZ,CZ,OL
3 If type U or type W, please mark terminal distance
4 If you have special requirements about resistance, please inform resistance
5 Quantity
Packing & Delivery
Packaging for cast in heater
1) plastic bag + carton for cast in heater
2) wooden box for cast in heater
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.