Pre Terminated 2M 40G 16F MPO Trunk Cable
16F MPO Pre-terminated Trunk Cable 2M 40G Low Insertion Loss MPO Fiber
Basic Information:
A 16F MPO pre-terminated trunk cable is mainly used for the connection of optical fiber between HDA, and EDA areas in the data center. With the 16-core high-quality optical cable and MPO components, it can fully meet the strict requirements of 400G transmission network with low insertion loss, high return loss. It can also downward compatible with the100G, 40G, 25G, 10G transmission by using the fanout cable and MPO-LC Module.
Our 16F trunk cable is based on 16F fiber which reduces the complexity of installation and deployment and achieving 100% utilization of the fiber cable, all of the products meet the relevant standards of environmental policies, environmental protection, and flame retardant.
Main Features:
- Low insertion loss and high return loss, meeting the transmission standard of 400G optical fiber
- Follows the 400G OSFP and 400G QSFP-DD standard by using a 16F MPO optical fiber connector, compatible with existing optical fiber transmission of 40G and 100G by using the fanout cable and MPO-LC module.
- The trunk cable is based on 16F fiber which reduces the complexity of installation and deployment and achieving 100% utilization of the fiber cable.
- All of the products meet the relevant standards of environmental policies, environmental protection, and flame retardant.
- Highest density physical contact for multi-fiber connectors
- Ultra-high fiber count cabling solution Center
- Satisfies client's needs in different industries
- Superior optical performance to satisfy customers' need, also can choose fiber color code
Specifications and Parameter:
16F MPO Fiber Optic Performance:
| MPO Connector | Standard Sm | Low Loss Sm | Standard Mm | Low Loss Mm | |
| Insertion Loss | Typical(dB) | 0.35 | 0.2 | 0.35 | 0.2 |
| Maximum(dB) | 0.75 | 0.35 | 0.6 | 0.35 | |
| Return Loss (dB) | ≥60 for APC (8 angle polish) |
≥20 for PC | |||
| ≥50 for PC | — | ||||
| Male/Female(dB) | Male:with pins,Female:without pins | ||||
| Tensile Strength (dB) | ≤0.3 ( max 66N ) | ||||
| Vibration (dB) | ≤0.3 ( 10-55Hz ) | ||||
| Thermal Cycle (dB) | ≤0.3 (-40~75℃, 21cycles) | ||||
Geometric parameter of end-face:
| Item | Spec | ||||
| SM | MM | ||||
| RX(mm) | MIN 2000 | ||||
| RY(mm) | MIN 5 | ||||
| Fiber Height (nm) | 1000-3500 | ||||
| Max. diff. Height all (nm) | MAX: 500 | ||||
| Max. diff. Height adj (nm) | MAX: 300 | ||||
| X-Axis Angle ( °) | -0.2 ~ 0.2 | ||||
| Y-Axis Angle ( °) | PC: -0.2 ~ 0.2 APC: 7.8 ~ 8.2 |
-0.2 ~ 0.2 | |||
| Core Dip | N/A | -100 ~ 200 | |||
Ordering Information:
| MPO | -XX | -XX | -XX | -X | -XX | -X | -XX |
| A1: G657A1 A2: G657A2 M3: OM3 M4: OM4 M5: OM5 |
LZ: LSZH NP: OFNP NR: OFNR |
FF: MPO /MPO(female to female ) MF: MPO/MPO (male to a female) MM: MPO/MPO (male to male) |
L: Low loss B: Standard loss |
12:1×12 core 48:4×12 core 72:6×12 core 96:8×12 core |
A: TIA568 through-type B: TIA568 Reverse type C: TIA568 cross-type |
5M to 50M |
|
| Gender Type | Housing color | Ferrule | Connector loss standard | Fiber cores | Polarity | Fiber length |
Application:
- Data Center Interconnect
- Backbone Installations
- Telecommunication Networks
- Broadband/CATV Networks
- LAN/WAN Premise
- 16-core MTP used in high-density trunk solution
- Deploy directly into 16x25G active devices
Geehe's Service:
- Distribute some or all of the fibers in a trunk cable to other areas
- Fiber counts available in 12 / 16 / 24 / 32 / 36 / 48 / 72 / 96 / 144-fibers
- Round & mini-core cable structure
- Pulling eye design
- Options of pinned (Male type) non pinned (Female type) on connector ends
- Available in different fiber modes including Singlemode(OS2) & multimode (OM1 ~ OM5) with customized length and structure
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.