Fiber Jumper G657A ST To SC Duplex 10g Single Mode Fiber Patch Cord

1. Fiber Patch Cord Basic Introduction:

Singlemode (SM) and multi-mode (MM) & Polarization Maintaining (PM) fiber optic patch cords & optical cable assemblies feature quality parts and guaranteed performance specifications. Single-mode and multi-mode patch cords Specifications are per mated pair at both 1310nm and 1550nm with length tolerance at ±10% (minimum tolerance is ±5cm). Our patch cords are available with ST, FC, SC, LC, FC/APC, and SC/APC connector options or as a pigtail assembly.

This Single-Mode patch cord uses a 9/125µm fiber optic patch cable with dual ST/UPC connectors on one end and dual SC/APC connectors on the other.

2. Fiber Optic Jumper Benefit & Features:

• Fiber Construction
  Our standard patch cables are available in several different lengths and connector types. These fibers have a 900 µm jacket surrounded by a layer of Aramid yarn for extra protection. A 2.5 mm PVC cable jacket provides additional environmental protection.
• Custom Singlemode Patch Cables
  Use Model Number F-PATCH-CUSTOM to configure a custom fiber-optic patch cord using these fibers. You can specify the fiber type, length, jacketing, and input and output connectors.
• Excellent Performance
  Our Standard Patch Cables exhibit low attenuation while utilizing step-index fibers and also have a uniform core refractive index and a matched-clad profile.
• Popular Versions Available Off-the-shelf
  We carry many standard fiber optic patch cables available off-the-shelf for operating wavelengths of near UV 300, visible 488/514, 633, infrared 780, 820, 980, 1060, or 1300/1550 nm. If there is not a standard patch cable available for your application
• Each patch cord is packaged in a sealed plastic bag with cleaning instructions

3. Fiber Optic Jumper Applications:

• Telecommunication Networks 
• Cable Television (CATV)
• Premises Distribution
• Local Area Networks (LAN)
• Fiber -to the- Home (FTTx)
• Sensors
• Instrumentation
• Device pigtails
• Light delivery

4. Specification&Technology Parameters

5. Ordering Information 

Legacy ordering information

6.  Options Available

-- LC Custom fiber optic jumper options include.
-- LC/PC (Physical Contact) Polish
-- LC/UPC (Ultra Physical Contact) polish
-- LC/APC (Angled Physical Contact) polish

Jacket: Riser (OFNR), Plenum (OFNP), Low Smoke Zero Halogens (LSZH), PVC

Diameter: 0.9mm (900µm), 1.6mm, 1.8mm, 2.0mm, 3.0mm

Jacket Colors: Aqua, Orange, Green, Red, Blue, Gray, Black, Yellow
LC Multimode 62.5/125µm MMF Fiber (Corning Fiber Optic Cable)
LC Multimode 50/125µm MMF OM2 Fiber (Corning Fiber Optic Cable)
LC Multimode 50/125µm MMF OM3 10Gb Laser Optimized Fiber (Corning Fiber)
LC Simplex cables or LC Duplex Cables are also available in optional colors.
LC Standard boot, LC 45° angled boot, LC 90°angled boot, or short boot options.
Corning Fiber Optic Cable, or Fiber One Fiber.
Call us today to speak with one of our qualified salespeople to help answer any questions.