400G 16F 3.6mm MPO Fiber Cable
OM3, OM4 3.0mm, 3.6mm Round Cable 400G 16F MPO Pre-terminated Jumper Cable
Basic Information:
The OSFP-SR8 or MPO jumper with the 16F MPO connector is used for the connection between the OSFP-SR8 400G optical transceiver module in the data center.
It can fully meet the harsh high-speed network with Low insertion loss, high return loss by using the high-quality cable and MPO components.
With high performance and ingrained simplicity, our Light-LINKSTM low-loss MPO Trunks are the foundation of simpler, faster, and superior pre-terminated fiber connectivity solutions supporting the data center.
Features&Benefits:
- Smaller cable bending radius to save the space, facilitate ventilation and heat dissipation equipment by using 3.0mm, 3.6mm round cable
- Meet the harsh high-speed network with Low insertion loss, high return loss
- OM3, OM4, and other optical fiber are available according to the different requirements of the customers.
- Eliminates the cost of field-termination
- Eliminates termination errors, Minimize install time
- Terminated with low loss 12 fiber MPO connectors
- Available in OS2, OM3, OM4 with LSZH sheath
- Available in lengths from 10mtrs up to 500mtrs
Specifications and Parameter:
16F MPO Fiber Optic Performance:
| MPO Connector | Standard Sm | Low Loss Sm | Standard Mm | Low Loss Mm | |
| Insertion Loss | Typical(dB) | 0.35 | 0.2 | 0.35 | 0.2 |
| Maximum(dB) | 0.75 | 0.35 | 0.6 | 0.35 | |
| Return Loss (dB) | ≥60 for APC (8 angle polish) |
≥20 for PC | |||
| ≥50 for PC | — | ||||
| Male/Female(dB) | Male:with pins,Female:without pins | ||||
| Tensile Strength (dB) | ≤0.3 ( max 66N ) | ||||
| Vibration (dB) | ≤0.3 ( 10-55Hz ) | ||||
| Thermal Cycle (dB) | ≤0.3 (-40~75℃, 21cycles) | ||||
Geometric parameter of end-face:
| Item | Spec | ||||
| SM | MM | ||||
| RX(mm) | MIN 2000 | ||||
| RY(mm) | MIN 5 | ||||
| Fiber Height (nm) | 1000-3500 | ||||
| Max. diff. Height all (nm) | MAX: 500 | ||||
| Max. diff. Height adj (nm) | MAX: 300 | ||||
| X-Axis Angle ( °) | -0.2 ~ 0.2 | ||||
| Y-Axis Angle ( °) | PC: -0.2 ~ 0.2 APC: 7.8 ~ 8.2 |
-0.2 ~ 0.2 | |||
| Core Dip | N/A | -100 ~ 200 | |||
Ordering Information:
| MPO | -XX | -XX | -XX | -X | -XX | -X | -XX |
| A1: G657A1 A2: G657A2 M3: OM3 M4: OM4 M5: OM5 |
LZ: LSZH NP: OFNP NR: OFNR |
FF: MPO /MPO(female to female ) MF: MPO/MPO (male to a female) MM: MPO/MPO (male to male) |
L: Low loss B: Standard loss |
12:1×12 core 48:4×12 core 72:6×12 core 96:8×12 core |
A: TIA568 through-type B: TIA568 Reverse type C: TIA568 cross-type |
5M to 50M |
|
| Gender Type | Housing color | Ferrule | Connector loss standard | Fiber cores | Polarity | Fiber length |
16F Pre-terminated Jumper Cable Application:
- Datacenter systems wiring
- Head-end termination to a fiber"backbone"
- Termination of fiber rack systems
- Multi-floor deployment & Intra-building "backbones"
- Datacenter
Geehe's Standards Compliance :
- Low smoke (IEC 61034)
- Halogen-free (IEC 60754-1)
- Fire retardant (IEC 60332-3)
- Corrosion-resistant (IEC 60754-2)
- Compliant to TIA 604-5 and IEC 61754-7
- Standards ISO/IEC 11801 / EN 50173-1 / TIA-568C.0
- Data Center EN 50173-5 / ISO/IEC 24764/ TIA-942
- Ethernet IEEE 802.3; 10/40/100GbE
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.