Mulitfiber 3.0MM 40G MPT MPO Breakout Cable
100% Factory Tested 40G Mulitfiber MPO / MPT Fiber Connector Breakout Cable
Basic Information:
MTP/MPO Data Center Cable Solutions:
With high-density connectors, multiple cable configurations, and integrated specialty components, MTP/MPO Data Center Solutions support the integration of high-performance networks while reducing the number of cables required and, thus, reducing overall system cost and maintenance.
As data centers transmit an ever-increasing amount of data at ever-increasing speeds, real estate becomes constrained and cable management becomes a challenge. Molex Data Center MPT/MPO Cable Solutions supports high-density data center applications while maintaining a small form factor.
Datacenter and telecommunication customers demand high-quality products to support data center maintenance and installation.
Main Features:
- Lower Insertion Loss & Higher Performance
- Complied with ANSI/TIA-568-C.3, IEEE 802.3ba and adheres to ANSI/TIA-942
- Low IL and stable signal transmission ensuring your network safety
- High-quality MTP connectors and guaranteed by the 3D interferometer
- All of the products meet the relevant standards of environmental policies, environmental protection, and flame retardant.
- Highest density physical contact for multi-fiber connectors
- Ultra-high fiber count cabling solution Center
- Satisfies client's needs in different industries
- Superior optical performance to satisfy customers' need, also can choose fiber color code
Specifications and Parameter:
16F MPO Fiber Optic Performance:
| MPO Connector | Standard Sm | Low Loss Sm | Standard Mm | Low Loss Mm | |
| Insertion Loss | Typical(dB) | 0.35 | 0.2 | 0.35 | 0.2 |
| Maximum(dB) | 0.75 | 0.35 | 0.6 | 0.35 | |
| Return Loss (dB) | ≥60 for APC (8 angle polish) |
≥20 for PC | |||
| ≥50 for PC | — | ||||
| Male/Female(dB) | Male:with pins,Female:without pins | ||||
| Tensile Strength (dB) | ≤0.3 ( max 66N ) | ||||
| Vibration (dB) | ≤0.3 ( 10-55Hz ) | ||||
| Thermal Cycle (dB) | ≤0.3 (-40~75℃, 21cycles) | ||||
Geometric parameter of end-face:
| Item | Spec | ||||
| SM | MM | ||||
| RX(mm) | MIN 2000 | ||||
| RY(mm) | MIN 5 | ||||
| Fiber Height (nm) | 1000-3500 | ||||
| Max. diff. Height all (nm) | MAX: 500 | ||||
| Max. diff. Height adj (nm) | MAX: 300 | ||||
| X-Axis Angle ( °) | -0.2 ~ 0.2 | ||||
| Y-Axis Angle ( °) | PC: -0.2 ~ 0.2 APC: 7.8 ~ 8.2 |
-0.2 ~ 0.2 | |||
| Core Dip | N/A | -100 ~ 200 | |||
Ordering Information:
| MPO | -XX | -XX | -XX | -X | -XX | -X | -XX |
| A1: G657A1 A2: G657A2 M3: OM3 M4: OM4 M5: OM5 |
LZ: LSZH NP: OFNP NR: OFNR |
FF: MPO /MPO(female to female ) MF: MPO/MPO (male to a female) MM: MPO/MPO (male to male) |
L: Low loss B: Standard loss |
12:1×12 core 48:4×12 core 72:6×12 core 96:8×12 core |
A: TIA568 through-type B: TIA568 Reverse type C: TIA568 cross-type |
5M to 50M |
|
| Gender Type | Housing color | Ferrule | Connector loss standard | Fiber cores | Polarity | Fiber length |
Application:
- Data Center Interconnect
- QSFP+ to QSFP+ Connection
- QSFP to QSFP Connection
- 40GE to 40GE Interconnection
- PSM4 to PSM4 Connection
- 4x25G to 4x25G connection
- 400G to 400G Interconnection
Geehe's Service:
- Distribute some or all of the fibers in a trunk cable to other areas
- Fiber counts available in 12 / 16 / 24 / 32 / 36 / 48 / 72 / 96 / 144-fibers
- Round & mini-core cable structure
- Pulling eye design
- Options of pinned (Male type) non pinned (Female type) on connector ends
- 16-Fiber or 32-Fiber (2×16 Configurations)
- Highest density physical contact for multi-fiber connectors
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.