5 - 6 Ton Lithium Powered Forklift Counterbalance Lift Height 3m
5-6 Ton Lithium Battery Powered Counterbalance Forklift Lift height 3m
Size Information
| 5-6 Ton H Series Lithium Battery Powered Counterbalance Forklift | ||||||
| Characteristics | ||||||
| 1.1 | Model | HM CPD50 | HM CPD55 | HM CPD60 | ||
| 1.2 | Configuration mode | HI2/HI2LI | HI2/HI2LI | HI2/HI2LI | ||
| 1.3 | Rated capacity | Q(kg) | 5000 | 5500 | 6000 | |
| 1.4 | Load center | C(mm) | 500 | 500 | 500 | |
| 1.5 | Power type | Battery | ||||
| 1.6 | Driving type | Seated | ||||
| 1.7 | Wheel base | L1(mm) | 2100 | 2100 | 2100 | |
| Tyres | ||||||
| 2.1 | Tyre type | Pneumatic | ||||
| 2.2 | Wheel number (front/rear) | 2/2 | 2/2 | 2/2 | ||
| 2.3 | Front wheel base | W3(mm) | 1280 | 1280 | 1280 | |
| 2.4 | Rear wheel base | W2(mm) | 1190 | 1190 | 1190 | |
| 2.5 | Tyre (front) | 300-15-14PR | 300-15-14PR | 300-15-14PR | ||
| 2.6 | Tyre (rear) | 7.00-12SE | 7.00-12SE | 7.00-12SE | ||
| Size | ||||||
| 3.1 | Front overhang | L2(mm) | 565 | 565 | 565 | |
| 3.2 | Mast tilting angle, front/rear | α/β(°) | 6/12 | 6/12 | 6/12 | |
| 3.3 | Height with mast retraction | H1(mm) | 2230 | 2230 | 2230 | |
| 3.4 | Free lifting height | H3(mm) | 150 | 150 | 150 | |
| 3.5 | Max. lifting height | H(mm) | 3000 | 3000 | 3000 | |
| 3.6 | Max. height after lifting | H2(mm) | 4280 | 4280 | 4280 | |
| 3.7 | Overall guard height | H4(mm) | 2255 | 2255 | 2255 | |
| 3.8 | Fork size: length x width x thickness | L x W x T(mm) | 1070x150x50 | 1070x150x50 | 1070x150x60 | |
| 3.9 | Fork carriage, DIN standard | 3A | 3A | 4A | ||
| 3.10 | Overall length (fork excluded) | L’( mm) | 3185 | 3185 | 3185 | |
| 3.11 | Overall width | W1(mm) | 1600 | 1600 | 1600 | |
| 3.12 | Turning radius | r(mm) | 2930 | 2930 | 2930 | |
| 3.13 | Ground clearance of mast | H5(mm) | 170 | 170 | 170 | |
| 3.14 | Ground clearance of wheel base center(loaded) | H6(mm) | 200 | 200 | 200 | |
| 3.15 |
Right angle stacking aisle width (pallet 1000x1000mm, clearance 200mm) |
Ast(mm) | 4895 | 4895 | 4895 | |
| 3.16 | Right angle stacking aisle width (pallet 1200x1200mm, clearance 200mm) | Ast(mm) | 5095 | 5095 | 5095 | |
| 3.17 | Lateral fork adjustment Max./Min. | W5(mm) | 1380/300 | 1380/300 | 1380/300 | |
| Performance | ||||||
| 4.1 | Travelling speed(loaded/unloaded) | Km/h | 14/15 | 13/14 | 13/14 | |
| 4.2 | Lifting speed (loaded/unloaded) | m/s | 300/400 | 280/400 | 260/400 | |
| 4.3 | Lowering speed | m/s | 400 | 400 | 400 | |
| 4.4 | Gradeability (loaded) | % | 14 | 13 | 12 | |
| Weight | ||||||
| 5.1 | Total weight (with/without battery) | Kg | 7300/6720 | 8050/6185 | 8274/6184 | |
| 5.2 | Axle load (unloaded), front/rear | Kg | 3239/4045 | 3567/4482 | 3663/4611 | |
| 5.3 | Axle load (loaded), front/rear | Kg | 10775/1509 | 11856/1693 | 12706/1568 | |
| Battery | ||||||
| 6.1 | Battery voltage/capacity K5 | V/Ah | 80/840 | 80/700 | 80/800 | |
| 6.2 | Battery weight | Kg | 580 | 1865 | 2090 | |
| Motor and controller | ||||||
| 7.1 | Driving motor power-60 minutes | Kw | 18 | 19 | 19 | |
| 7.2 | Lifting motor power (S3 15%) | Kw | 26 | 26 | 26 | |
| 7.3 | Driving motor control mode | MOSFET/AC | MOSFET/AC | MOSFET/AC | ||
| 7.4 | Lifting motor control mode | MOSFET/AC | MOSFET/AC | MOSFET/AC | ||
| 7.5 | Service brake/parking brake | Hydraulic/Mechanical | ||||
| 7.6 | Hydraulic system working pressure | Mpa | 20 | 20 | 20 | |
Introduction
1.China top brand battery.
2.Lithium Battery of this electric forklift truck can be replaced with Lead Acid Battery.
3.Mast optional: 3/4/4.5/5/5.5/6/7m duplex mast, 3.6/4/4.5/5/5.5/6m triplex mast, 3/3.3/3.5/4//4.5/5/5.5/6m duplex full free mast.
4.Transmission: Automatic/manual.
5.Tire: Pneumatic.
6.Forks: 1070/1220mm etc.
Application
Mainly used for pallet goods handling, stacking and short distance transportation, widely used in factories, warehouses, logistics centers, supermarkets and other places. Models of sophisticated and flexible, convenient operation.
Product Details
Production Scene
Packing &Shoping
FAQ
Q1: Can Herrman provide customized products? OEM products or ODM products?
A1: Yes, Herrman can provide customized products according to your requirement. Both OEM and ODM are acceptable. We do a lot ofnon-standard products, welcome your special custom-made.
Q2: What's the specification of the chargers?
A2: Herrman have all kinds of the chargers and welcome the customers to custom-made.
Q3: How about the delivery time?
A3: Usually Herrman producing time is 15-20 working days after we receive the advanced payment. For some standard products, we have most in stock and could delivery immediately.
Q4: Can we print the LOGO on products?
A4: Yes, the OEM is available with the permission of our customers.
Q5: What is your payment term?
A5: T/T,L/C or O/A if you want any other way, please contact us.
Q6: What can I get from cooperating with Herrman?
A6: 1. Unique products, with customized service.
2. Timely production and delivery, time is money.
3. Market protection service, long term business strategy.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.