Narrow Aisle 1500kg 3300lbs Hydraulic Electric Pallet Stacker
Electric Fork Reach narrow aisle Truck Capacity 1500kgs 3300lbs single scissor forklift max.lift height 6.5m
Electric fork reach narrow aisle truck CQDH15C advanteages:
SAFETY AND STABILITY
- Advanced AC control system eliminating the motor brushes and directional contactor, which makes the minimal maintenance requirements.
- Stepless speed control Intelligentized regenerative brake system: increase overall truck performance by decreasing battery charge intervals.
- Equipped with adjustable hand-rest, adapted to different operator.
- Multi-function display: battery status, hour meter, fault indicator etc.
- Two sides-way battery with roll-out system is very convenient to replace batteries.
- Damping cushion for low-noise operation.
- Built-in pressure relief valve protects the trucks from overloads.
- Emergency power disconnect.
STRUCTURAL
- Low Center of Gravity ensures the stable operation.
- Vertical driving wheel has a small turning radius and easy to maintain. The motor structure is water-proof and dust-proof.
- The Scissor Reach Forks is operated by electric controller, which makes operation stable and no impact.
SERVICEABILITY
- Low battery protection setting prolongs the battery use time.
- CANbus technology reduces wiring complexity and increase reliability.
- All pivot points have grease fitting and serviceable bushing, reducing component wear and extending component life.
- The back cover is easy to open for maintenance and adjustment of parts of valve, oil tube and electronic parts.
Electric fork reach narrow aisle truck CQDH15C size information:
| Model | CQDH15C (single scissor) | ||||
| Drive type | battery | battery | battery | battery | |
| Load capacity/Rated load | Q(kg) | 1500 | |||
| Load centre distance | c(mm) | 500 | |||
| Load distance, centre of drive axle fork | x(mm) | 334 | 309 | 246 | 246 |
| Tyre size, front | mm | 280×82+160×60 | 280×82+160×60 | 280×82+160x60x2 | 280×82+160x60x2 |
| Tyre size, rear | mm | 125×82(4) | 125×82(4) | 125x82x4 | 125x82x4 |
| Wheels, number front rear(x=driven wheels) | 1+2 | 1+2 | 1x+2/4 | 1x+2/4 | |
| Tilt of mast/fork carriage forward/backward) | Grad | 43866 | 43866 | 43866 | 43866 |
| Height, mast lowered | h1(mm) | 2125 2375 2625 | 2185 2345 2505 2675 | 2125 2375 2625 | 2185 2345 2505 2675 2840 |
| Free lift | h2(mm) | ~ ~ ~ | 1575 1700 1825 2000 | ~ ~ ~ | 1776 1776 2010 2080 2240 |
| Max. lift height | h3(mm) | 3000 3500 4000 | 4500 5000 5500 6000 | 3000 3500 4000 | 4500 5000 5500 6000 6500 |
| Height, mast extended | h4(mm) | 3881 4381 4881 | 5381 5881 6381 6881 | 3900 4400 4900 | 5400 5900 6400 6900 7400 |
| Height of overhead guard | h6(mm) | 2246 | 2246 | 2246 | 2246 |
| Overall width | b1/b2(mm) | 1310/1040 | 1310-1400/1040 | 1295/1040 | 1295/1040 |
| Overall length | l1(mm) | 2409 | 2435 | 2615 | 2616 |
| Length to face of forks | l2(mm) | 1339 | 1365 | 1518 | 1518 |
| Fork Dimension | s/e/l(mm) | 35/100/1070 | 35/100/1070 | 35/100/1070 | 35/100/1070 |
| Reach distance | l4(mm) | 500 | 500 | 600 | 600 |
| Fork height, lowered | h8(mm) | 130 | 130 | 130 | 130 |
| Distance of “X” (see below diagram) | mm | 450 | 450 | 450 | 450 |
| Overall length (excluding the fork) | mm | 1868 | 1868 | 1868 | 1868 |
| Ground clearance, centre of wheelbase | m2(mm) | 65 | 65 | 49 | 49 |
| Aisle width for pallets 1000×1200 crossways | Ast(mm) | 2814 | 2839 | 2956 | 2956 |
| Aisle width for pallets 800×1200 lengthways | Ast(mm) | 2871 | 2902 | 3027 | 3027 |
| Turning radius | Wa(mm) | 1718 | 1718 | 1791 | 1791 |
| Travel speed, laden/unladen | Km/h | 6.5/7 | 6.5/7 | 6.5/7 | 6.5/7 |
| Lift speed, laden/unladen | m/s | 0.135/0.161 | 0.135/0.161 | 0.27/0.43 | 0.27/0.43 |
| Lowering speed, laden/unladen | m/s | 0.15/0.122 | 0.15/0.122 | 0.45/0.364 | 0.45/0.364 |
| Battery voltage, nominal capacity K5 | V/Ah | 24/420(560) | 24/420(560) | 36/700 | 36/700 |
| Battery weight | kg | 340/425 | 340/425 | 810 | 810 |
| Battery dimension l/w/h | mm | 780x335X500 | 780x335X500 | 978x395x765 | 978x395x765 |
| Service weight (with battery) | kg | 2450 2500 2560 | 2700 2800 2900 3000 | 3130 3180 3230 | 3470 3570 3670 3370 3770 |
FAQ
Q1: Can Herrman provide customized products? OEM products or ODM products?
A1: Yes, Herrman can provide customized products according to your requirement. Both OEM and ODM are acceptable. We do a lot ofnon-standard products, welcome your special custom-made.
Q2: What's the specification of the chargers?
A2: Herrman have all kinds of the chargers and welcome the customers to custom-made.
Q3: How about the delivery time?
A3: Usually Herrman producing time is 15-20 working days after we receive the advanced payment. For some standard products, we have most in stock and could delivery immediately.
Q4: Can we print the LOGO on products?
A4: Yes, the OEM is available with the permission of our customers.
Q5: What is your payment term?
A5: T/T,L/C or O/A if you want any other way, please contact us.
Q6: What can I get from cooperating with Herrman?
A6: 1. Unique products, with customized service.
2. Timely production and delivery, time is money.
3. Market protection service, long term business strategy.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.