IP65 ABS Case 12 Volt 100Ah Lifepo4 Lithium Ion Battery For RV
IP65 ABS Case 12 Volt 100Ah Lifepo4 Lithium Ion Battery For RV
IP65 ABS Case 12 Volt 100Ah Lifepo4 Lithium Ion Battery For RV
LiFePO4 battery has no memory effects and highly efficient charge: lithium iron phosphate batteries do not have memory effect, no matter what state the battery is on, it can be charged or used at any time, no need to charge it under the situation of fully discharged. Besides, lithium iron phosphate battery can be high current 2C fast charged and discharged, under the special charger ,1.5C charge can make the battery full of capacity within 40 minutes, the starting current can reach 2 C, and the lead acid battery does not have this performance at present.
1. Product Introduction
|
Model No. |
YS12-100-BT-C |
|
Nominal Voltage |
12.8V |
|
Nominal Capacity @ 0.2C |
100Ah |
|
Watt-Hour |
1280Wh |
|
Dimensions |
|
|
Length |
329mm |
|
Width |
172mm |
|
Height |
223mm |
|
Weight |
Approx. 13.5Kg |
|
Internal Resistance |
≤40mΩ @ 50% SOC |
|
Recommended Charge Current |
20A |
|
BMS Maximum Charge Current |
100A |
|
Charge Cut-off Voltage |
14.6V |
|
BMS Maximum Continuous Discharge Current |
100A |
|
Peak Discharge Current |
300A (2S) |
|
Discharge Cut-off Voltage |
10.0V |
|
Expected Cycle Life |
Residual capacity is more than 80% of initial capacity after 3,000 cycles at 25℃, 1C |
|
Self Discharge |
<3% per month |
|
Cell Type |
Cylindrical 32700, 4S17P |
|
Operating Temperature |
|
|
Charge |
0 - +55°C |
|
Discharge |
-20 - +60°C |
|
Storage |
-5 - +35°C |
|
Humidity |
RH≤85% |
|
Housing Material |
ABS |
|
Enclosure Protection |
IP65 |
|
Terminal Type |
M8 |
|
Communication |
Bluetooth(optional) |
2. Packing & Delivery
2. Certification
3. Related Products---Battery pack can be Customized
MaxLi 12.8V LiFePO4 battery packs with ABS case and built-in PCM are specially designed as replacement to 12V lead acid batteries.
Built-in PCM is able to prevent the battery from over-charging, over-discharging, over current, over temperature and short circuit.
PCM also balances the cells to extend the service life of the battery packs. Batteries can be used in series and parallel,
4 batteries can be connected in series at most, we recommend fewer than 10 batteries in parallel.
| Model | Nominal Voltage | Capacity | Max. Continuous Discharge Current | Dimensions | Case Material |
| YS12-6-BT | 12.8V | 6Ah | 10A | 151 x 65 x 95 | ABS |
| YS12-7-BT | 12.8V | 7.2Ah | 15A | 151 x 65 x 95 | ABS |
| YS12-12-BT | 12.8V | 12Ah | 20A | 151 x 65 x 95 | ABS |
| YS12-20-BT | 12.8V | 20Ah | 20A | 181 x 76 x 166 | ABS |
| YS12-18G-BT | 12.8V | 18Ah | 25A | 168 x 128 x 76 | ABS |
| YS12-24G-BT | 12.8V | 24Ah | 25A | 168 x 128 x 102 | ABS |
| YS12-24-BT | 12.8V | 24Ah | 25A | 181 x 76 x 176 | ABS |
| YS12-30-BT | 12.8V | 30Ah | 30A | 175 x 165 x 125 | ABS |
| YS12-36-BT | 12.8V | 36Ah | 30A | 194 x 130 x 162 | ABS |
| YS12-42-BT | 12.8V | 42Ah | 40A | 197 x 135 x 172 | ABS |
| YS12-48-BT | 12.8V | 48Ah | 50A | 197 x 166 x 176 | ABS |
| YS12-50-BT | 12.8V | 50Ah | 50A | 229 x 139 x 209 | ABS |
| YS12-60-BT | 12.8V | 60Ah | 60A | 250 x 160 x 175 | ABS |
| YS12-78-BT | 12.8V | 78Ah | 75A | 260 x 167 x 212 | ABS |
| YS12-100-BT | 12.8V | 100Ah | 100A | 328 x 172 x 212 | ABS |
| YS12-150-BT | 12.8V | 150Ah | 150A | 485 x 172 x 240 | ABS |
| YS12-200-BT | 12.8V | 200Ah | 150A | 523 x 235 x 222 | ABS |
| YS12-300-BT | 12.8V | 300Ah | 150A | 523 x 267 x 222 | ABS |
4. Products Advantage
-
Long cycle life
-
No memory effect
-
High energy density
-
Pollution-free
-
High discharge rate
-
Light weight
-
High working voltage for single battery cells
-
Capacity, resistance, Voltage, platform time consistency is good
-
With short-circuit production function, safe and reliable
-
Good consistency, low self-discharge
5. FAQ:
Q1:Can I have samples to test? And what is lead time for sample order?
A1:Yes,we can supply samples,the leadtime for samples is 7-10 days.and buyer pay for sample cost and shipping cost.
Q2: Do you provide after-sales serive?
A2: Yes,the warranty is 3 years, if any quality problems on our side in this period, we can send new one as replacement.Q3 What is your company's advantage?
A3: We only supply high level quality of lithium battery and we gurantee on-time shipment,we also provide excellent after sales service
Q4: Do you accept OEM/ODM?
A4: Yes,it is avaliable.
Q5: What is your lead time for the mass production?
A5: General speaking, about 25-30 days depending on different items after getting down payment and confirmation about the samples.
Q6:Are you battery real capacity?
A6:All of our battery cells with Grade A,100% new and real capacity.
Q7:Are you a factory or a trading company?
A7:MaxLi battery Ltd is a professional rechargeable lithium-ion battery and LifePO4 battery manufacturer,welcome to visit.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.