PZT8 Piezoelectric Ceramic Rings 30X10X6mm For Ultrasonic Transducer

Rsp30 Pzt8 Piezoelectric Ceramic Ring 30X10X6mm for Ultrasonic Transducer

In the design of an ultrasonic transducer, various factors should be considered, such as acoustic impedance, frequency response, impedance matching, acoustic structure, vibration mode, and conversion material, as well as how to design and coordinate these factors to achieve the optimal value of the electroacoustic conversion. As an energy transmission network, the piezoelectric ceramic transducer has the problem of energy conversion efficiency.

The principle of the piezoelectric ceramic transducer is that when pressure or tension is applied to the ceramic plate, opposite polarity charges will be generated at both ends of the ceramic plate, and current will be generated through the circuit. This effect is called the piezoelectric effect.

Piezoelectric materials of piezoelectric ceramic discs: PZT4, PZT5, PZT8, or other required piezoelectric materials.

Pzt8 piezoelectric ceramic rings can also be customized, If you need other sizes of the piezoelectric ceramic rings, feel free to contact us.

Technical parameters:

Features:

* Good stability

* High sensitivity

* Low heat

* High vibration efficiency

Before shipment, we always test each ceramic disc one by one to make sure it can  pass the quality  control, and every ceramic disc has its testing report as shown:

Application:

Piezoelectric ceramic discs can be used for ultrasonic welding transducers and ultrasonic cutting transducers. ultrasonic cleaning transducers and so on.

If you need other sizes of piezoelectric ceramic discs, feel free to contact us.