Rsp50 Pzt8 50*20*5 Piezoelectric Ceramic Ring 50mm for Ultrasonic Welding

Technical parameters:

Ceramic Piezoelectric Materials Piezoelectric elements can convert electrical and mechanical signals. Piezoelectric ceramic elements of a certain shape are mainly made by sintering PbTiO3-PbZrO3 system (PZT). Even if it is a sintered body, the piezoelectricity of a single crystal can be obtained by polarization. The main uses of piezoelectric components are spark plugs and resonators. The resonator acts as a radio wave filter that selectively passes a specific frequency, and is an indispensable component of a tuning circuit such as television (TV) and radio.

In the design of ultrasonic transducer, various factors should be considered, such as acoustic impedance, frequency response, impedance matching, acoustic structure, vibration mode, and conversion material, as well as how to design and coordinate these factors to achieve the optimal value of the electroacoustic conversion. As an energy transmission network, the piezoelectric ceramic transducer has the problem of energy conversion efficiency.

Piezoelectric materials of piezoelectric ceramic discs: PZT4, PZT5, PZT8, or other required piezoelectric materials.

Pzt8 piezoelectric ceramic rings can also be customized, If you need other sizes of piezoelectric ceramic rings, feel free to contact us.

Features:

* Good stability

* High sensitivity

* Low heat

* High vibration efficiency

Before shipment, we always test each ceramic disc one by one to make sure it can  pass the quality  control, and every ceramic disc has its testing report as shown:

Application:

Piezoelectric ceramic discs can be used for ultrasonic welding transducers, ultrasonic cutting transducers. ultrasonic cleaning transducers and so on.

If you need other sizes of piezoelectric ceramic discs, feel free to contact us.

Detailed Photos: