CNC Grinding RA0.8 Hot Platen For Plywood Press
Custom Made Plywood Hot Press Platen for Plywood Hot Press
Those plywood hot platens are made as per the highest quality standard and following the production drawings of the world leading plywood hot press makers,such as Raute,Biele Group,Cremona.
The quality requirement has been detailed from Raw steel plate grade and source to finished hot platen packing:
Raw steel:Q345B(S355J2+N) SIZE:1450*2800*45MM
Deep hole diameter:25mm And drilling from both ends and middle joints tolerance within 2mm
Welding Slots width 30mm and tolerance +0.5mm and depth tolerance +0.5mm
Weldings are not allowed any defects or bubbles,any leaking is not acceptable
Two times hydraulic testing have been done in order to make sure we have no leaking problem
CNC machining for width and length are applicable in order for precise assembly
Surface grinding quality has been specific higher requirement for RA 0.8 Parallizm 0.1mm Flatness:0.10mm,any thickness minus tolerance and defects are not allowed
Surface RA 1.6 Parallizm 0.1mm Flatness:0.10mm
Hydraulic Testing:100kg/cm2 holding time 20 munites temperature tolerance within 3 c-degrees
Production flow:Rough surface milling-deep hole drilling;slotting;weldings;CNC precise milling;rough grinding;CNC grinding-testing-packing-container loading
Send us your enquiry if you have the similar demand:blutechmachining@163.com Contact person:Bruce Song
Hot Platen Size: 1400*2800*45mm for 5 daylights laminating hot press
2000*3600*50mm hot poress platen for 15 daylights overlaying hot press:
2000*3600*50mm hot poress platen for 15 daylights overlaying hot press:
Hot press platens for 25 daylights plywood hot press:
Hot press platens for 20 daylights overlaying hot press:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.