500 HBW Abrasion Resistant Steel Plates Bending Thick EN ISO 6506
From SSAB 500 Wear Plate WIith Hardness Of 500 HBW For LINER PLATES Bending Welding Service Available
500 plate For wear resistant steel plate overviews
The bendable, weldable and highly abrasion-resistant steel.
® 500 is a bendable and weldable abrasion-resistant steel, with a nominal hardness of 500 HBW. Suitable for applications that demand higher wear resistance.
® 500 increases payload and increases service life while maintaining good processability and toughness.
Except our extensive stock on site . we also provide Products value-added services , which include Cutting <Laser cutting , Plasma cutting , Thermal cutting , Water jet cutting etc >, Bending service Welding service and Machining services .
As a major stockholder, processor , suppliers and exporter of wide range of 500 Plates in china, serving throughout worldwide. These 500 offered by us is consists of a hardened steel particularly suited for long-term use in abrasive environments with high surface pressure.
These 500 Abrasion Resistant Plates are available in various specification & thickness as per the requirements of clients. With our inventory and our location beside two major SSAB warehouse in china ,We also have our own processor ability
therefore we guarantee quick delivery .
| Material | ||
| Grades | 400 | 500 |
| 450 | 600 | |
| Features | Wear Plate | Tough |
| Abrasion Resistant | Extremely Formable | |
| Versatile | ||
| Form | Plate / Sheet / Bar | |
| Thickness | 2mm thru 130 thick | |
| Length | Up to 16000 MM | |
| Width | Up to 3500 mm | |
| Process | Plasma Cutting | Shape Burning |
| Track Torch | Drilling & Tapping | |
| Radiograph | Machining | |
| Weight | Contact us for details | |
| Tensile Strength | 130 psi | |
| Intended Applications | Heavy Mining Equipment | Drip Pans |
| Repair Bucket Work | Conveyor Bottoms | |
| Replacement Parts | Custom Chutes | |
| Sumps | ||
| Industry Focus | Coal Mining | Factories |
| Rock Quarry | Heavy Equipment | |
500 Sheet / plate / Technical Datasheet , Dimension Range
CHEMICAL COMPOSITION
| C * | Si * | Mn * | P | S | Cr * | Ni * | Mo * | B * |
|---|---|---|---|---|---|---|---|---|
| Max % | Max % | Max % | Max % | Max % | Max % | Max % | Max % | Max % |
| 0.30 | 0.70 | 1.60 | 0.020 | 0.010 | 1.50 | 1.5 | 0.60 | 0.005 |
MECHANICAL PROPERTIES
| Thickness | Hardness HBW | Typical yield strength |
|---|---|---|
| Mm | min - max 1) | MPa, not guaranteed |
| 4 - 32 | 470 - 530 | 1250 |
| (32) - 80 | 450 - 540 | 1250 |
Brinell hardness, HBW, as per EN ISO 6506-1, on a processed surface 0.5 - 3 mm beneath surface. No less than one test example for every heat and 40 tons.
The ostensible material thickness won't go amiss more than + 15 mm from that of the test examples.
The plates are through-solidified to at least 90 % of the ensured least surface hardness
Dimension Range
| Name | Thickness | Width |
| 500 Sheet | 3.2~8mm | 600~1500mm |
| 500 plate | 4~130 mm | 600~3350mm |
| 500 Bar |
other specification and Dimension is available upon request
500 plate Value -added processing services
With Our wide range of Value-added processing services , can be welded, bent,
cut and machined usingrun-of-the-mill techniques and tools. You get the superior performance
of without having to invest in special equipment and training.
Preheating
The right preheat and interpass temperature for each welding situation will optimize the result.
Welding
Any conventional welding method can be used for welding these steels to any type of weldable steel.
Cutting
wear plate can very well be cut using both cold and thermal cutting methods.
Bending
is eminently well suited for cold bending.
Machining
can be machined with high speed steel or cemented carbide tools.
Why Choose Us
Xzh steel is one of the major suppliers , wholesaler , stockholder of products. Our skilled work force has many years’ experience of working with this material. Beside our inventory ,We have location just beside two major SSAB warehouse which
gurantee our quick delivery time .
We can offer customers a fast turnaround due to our extensive stock in all grades and thicknesses. We can offer expert advice to discuss your wearplate requirements and help in the design optimisation stage of the project.Due to our extensive manufacturing capabilities we can processor up to 700HB, press parts up to 14.6m in length and waterjet cut to avoid a Heat Affected Zone (HAZ). Withour whole supply chain integration , As we provide wide range of cut to size service , we take
advantage of all material and extend our supply chain to Wear parts .
500 Product Application
Down-to-Earth Advantages for Quarrying and Mining
Quarry and open pit mine operations put high demands on equipment. When it comes to abrasion resistance, compromise can be costly. wear plate delivers unsurpassed advantages to the quarrying and mining sector throughout the entire production flow. This includes economic benefits that can make a significant difference in mining operations.
Shovel bucket structures can be built with 400/450. HiTuf is recommended for cutting edges while 500/550 are ideal for bucket cheek plates.
HOPPER & FEEDER
500/550/600 are the right choices for hoppers and feeders.
Bulldozer
400/450/500 grades are ideal for premium blade structures. Use 500/550 for cutting edges and HiTuf for the rippers.
CRUSHER
All grades can be used in crushers depending on the crusher type and the nature of the wear exposure
DUMP TRUCK
lets you design low-weight bodies with the wear resistant qualities of much heavier structures. It is also an excellent choice for truck body liner plates. The sides, floors and fronts are ideally protected by 400/450/500.
TRANSFER CHUTE
Every change of transfer direction needs a chute. The chutes can be made of 450/500/550/600.
DUMP POCKET
At the discharge site, use 400/450/500 to line dump pockets.
TIPPER
Use 400/450/500 in the body of the tippers. is an outstanding wear fighter in this application. also has great impact and dent resistance, making it an excellent design solution.
Recycling Components for Tough Demands
Recycling processes like the fragmentizing of waste places enormous demands on equipment. And if the materials involved, wear too quickly it can also mean enormous costs. To stay productive and competitive it is vital to use materials that stand up to the abuse. wear plate is the solution.
400 or 450. With the increased hardness of , lighter trucks with higher payloads can be produced. For packer blades inside garbage trucks, 450 or 500 is used.
LINER PLATES
500, 550 or 600. can be used to line the walls of the sorting pockets.
GRAPPLES
450 or 500. can significantly increase the life of the grapple and other gripping equipment.
SHREDDERS
500, 550 or 600. can also be used in shredders. The specific steel grade depends on the sorted material and the frequency of tough, hard-crushed objects in the machine. The high toughness of steels provides shredders with a substantially higher resistance against cracking and cleavages.
GRANULATOR KNIVES
600 or Extreme. Granulator knives are used for the fragmentation of waste especially plastic, tires, cables and rubber waste. The high toughness of steels provides substantially higher resistance against chipping.
PRISMATIC KNIVES
Extreme or 600. For the fragmentation of waste, especially plastics, tires, cables and rubber waste, can be used. The high toughness of steels provides substantially higher resistance against chipping.
HAMMER MILLS
500, 550 or 600. Hammers are used for the fragmentation of waste and minerals. The high toughness of steels provides substantially higher resistance against cracking.
SIEVES/SCREEN
500 or 450. Roll-bended sieves are most commonly used in recycling as both a sorting and fragmenting facility at the same time. The high toughness of steels provides a substantially higher resistance against cracking.
CONVEYOR BELT
450 or 500. plates can be used to line conveyor belts and be used in moving chains.
CONTAINERS
400 or 450. For use in the sides and floor of containers, wear plate combines toughness with high hardness, meaning more resistance to impacts and dents, and a higher wear resistance.
500 Product Display Package , Delivery
FAQ
Q: Would you provide samples For free?
A: Yes . with on stock specification We provide samples For Free . Freight charge collect
plate 500 synonyms
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.