Inconel 625 Nickel Alloy Stainless Steel Sheets Ams 5599 UNS N06625
Inconel 625 Nickel Alloy Sheet Ams 5599 UNS N06625 overview
Inconel625 sheets exhibit superior strength and durability and are prized for their outstanding oxidation and corrosion resistance. Maintaining their integrity across a temperature range spanning from cryogenic deep-freezes to 1000 degrees Celsius/2000 degrees Fahrenheit, Inconel® 625 sheets, commonly referred to as Alloy 625 sheets, are nickel-based, using columbium and molybdenum as refractory metals. During testing in hostile corrosive conditions, Inconel 625 displayed near-impenetrable resistance to salt water, neutral salts, fresh water, air and alkaline chemicals.
Produc Forms : Sheet, plate , Coil , Strip .wire , Pipe, Tube ,Bar , Profile, Round, Flat, Square, Hexagonal
Inconel 625 Nickel Alloy Sheet Ams 5599 UNS N06625 Specification and Dimension Ranges
Specifications
AMS 5599, AMS 5666, AMS 5837, ASME SB 443 Gr 1, ASME SB 446 Gr 1, ASTM B 443 Gr 1,
ASTM B 446 Gr 1, EN 2.4856, ISO 15156-3, NACE MR0175-3, UNS N06625, Werkstoff 2.4856
| Form | Standard |
| Metal Type | UNS N06625 |
| Bar | ASTM B446 AMS 5666 BS3076 |
| Wire | AMS 5837 |
| Sheet | ASTM B443 AMS 5599 BS3072 |
| Plate | ASTM B443 AMS 5599 BS3072 |
| Pipe | ASTM B444 ASTM B704 AMS 5581 BS3074 GE B50TF133 |
| Tube | ASTM B444 ASTM B704 AMS 5581 BS3074 GE B50TF133 |
| Fitting | ASTM B366 Din 17754 |
| Forging | |
| Weld Wire | |
| Weld Electrode | |
| NA 21 | All forms |
| Din | 2.4856 |
Common Trade Names
Some Normal specification at a glance
|
|
ASTM | JIS | AISI | EN |
| Grade | S30100 | SUS301 | 301 | 1.431 |
| S30400 | SUS304 | 304 | 1.4301 | |
| S30403 | - | 304L | 1.4307 | |
| S31008 | SUS310S | 310S | 1.4845 | |
| S31603 | - | 316L | 1.4404 | |
| S32100 | SUS321 | 321 | 1.4541 | |
| S41008 | SUS410S | 410S | - | |
| S43000 | SUS430 | 430 | 1.4016 | |
| S43932 | - | - | 1.451 | |
| S44400 | SUS444 | 444 | 1.4521 | |
| S44500 | SUS430J1L | - | - |
Dimension Ranges:
Width: 600mm~2030 mm
Thickness: 0.1~120.0 mm
Length: 300~6000 mm , Max 18000 mm
Surface Finish: No.1, 2B, BA, No.3, No.4, No.5, No.8, HL, Etching, SB, Ti-coating,color-coating ,embossing .
Inconel 625 Nickel Alloy Sheet Ams 5599 UNS N06625 Application
-
Components where exposure to sea water and high mechanical stresses are required.
Oil and gas production where hydrogen sulfide and elementary sulfur exist at temperature in excess of 150C.
Components exposed to flue gas or in flue gas desulfurization plants.
Flare stacks on offshore oil platforms.
Hydrocarbon processing from tar-sand and oil-shale recovery projects.Specific applications of Inconel® 625 sheets include furnace hardware, ductwork for gas-powered turbine systems, acid storage and production equipment, production tubing for sour gas, heat shields, chimney liners, heat exchangers, distillation columns and bubble caps.
Inconel® 625 also exhibits strong stability during welding, thanks to the presence of niobium. This super-alloy is also valued for its high levels of fatigue strength and imperviousness to chloride ions. Pickling is achieved by treating the super-alloy with sodium hydride, then submerging it in sulfuric acid for three minutes at a temperature of 74 degrees Celsius/165 degrees Fahrenheit.
Inconel® 625 super alloys are also available in plate, bar, forgings and tubing. Contact Xinzheng to Enquiry.
Inconel 625 Nickel Alloy Sheet Ams 5599 UNS N06625 Equivalent
DIN 1.4864
DIN X12NiCrSi36-16
AFNOR Z20NCS33-16
AISI 330
SAE 330
JIS SUH330
EN X12NiCrSi35-16
EN 1.4864
UNS R20033
Inconel 625 Nickel Alloy Sheet Ams 5599 UNS N06625 Technical datasheet
Chemical Composition
The following table shows the chemical composition of HAYNES(r) 230.
| Element | Content (%) |
|---|---|
| Nickel, Ni | 56.16-65.7 |
| Chromium, Cr | 20-24 |
| Tungsten, W | 13-15 |
| Molybdenum, Mo | 1-3 |
| Manganese, Mn | 1 |
| Silicon, Si | 0.25-0.75 |
| Carbon, C | 0.050-0.090 |
Physical Properties
The physical properties of HAYNES(r) 230 are outlined in the following table.
| Properties | Metric | Imperial |
|---|---|---|
| Density | 8.96 g/cm³ | 0.324 lb/in³ |
| Melting point | 1343°C | 2450°F |
Mechanical Properties
The mechanical properties of HAYNES(r) 230 are provided below.
| Properties | Metric | Imperial |
|---|---|---|
| Tensile strength | 485 MPa | 70300 psi |
| Yield strength | 275 MPa | 39900 psi |
| Elongation at break | 15.0 % | 15.0 % |
304 Alloy / 304L Stainless Steel Sheet - ASTM A240, ASME SA Products display and Package Details
General Q and A Questions
Q: Would you provide samples For free?
A: Yes . with on stock specification We provide samples For Free . Freight charge collect
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.