Cold Rolled Copolymer Coated Plastic Strip 0.35mm Laminated Metal
Laminated Metal Plastic Strip for communical cable
The plastic layer of EL or ELE type aluminum-plastic composite belt is usually made of ethylene monoacrylate copolymer (EAA) ethylene methacrylate copolymer (EMAA) and so on.
The plastic layer of YL or YLY type aluminum-plastic composite belt is made of low density polyethylene resin. The low density polyethylene resin should comply with the provisions of GB/T11115, and it is appropriate to use superior grade heavy film material or superior grade coating material.A layer of this part copolymer resin is allowed to be placed between the polyethylene plastic layer and the aluminum strip when making the aluminum-plastic composite tape.
| Property | Unit | Values | Test Method | |
| Color | Natural or Blue | N/A | ||
| Thickness | AI | mm | 0.08-0.5 | N/A |
| EAA | mm | 0.05 | N/A | |
| Tensile Strength | MPa | ≥65 | ASTME8 | |
| Elongation at break | % | ≥20 | ASTME8 | |
| Peel strength | N/cm | ≥6.13 | ASTME B736 | |
| Heat Seal strength | N/cm | ≥17.5 | ASTME B736 | |
| Corrosion resistance (0.1 mol/L,Hcl,480h) |
Grade | ≥7 | ﹍﹍﹍ | |
| Filler Resistance (68℃±1℃,168h) |
﹍﹍﹍ | No Delamination | PEA PE-39, PE-89 | |
| Peel strength after water bath (68℃±1℃, 168h) |
N/cm | ≥6.13 | ASTME B736 | |
| Dielectric Strength (one side DC 1kv,1min, two sides DC 2kV,1min) |
﹍﹍﹍ | No Break | ﹍﹍﹍ |
FAQ
Q: Would you provide samples For free?
A: Yes . with on stock specification We provide samples For Free . Freight charge collect
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.