3mm 1mm Calcined Kaolin Clay 44% White For Ceramic Fiber
3-1mm Grain Size Calcined Flint Clay Calcined Kaolin 45% For Ceramic Fiber
1. Calcined Flint Clay Introduction
Calcined kaolin flint clay clinker has good characteristics of stable volume, strength and small water absorption after high temperature calcined. To measure the sintering degree of calcined kaolin flint clay clinker, general indicators are the true proportion, bulk density, porosity, water absorption, shrinkage and so on. Good sintered calcined kaolin flint clay clinker’s water absorption is less than 5%, bulk density is more than 2.55g / cm3.
2. Calcined Flint Clay Specifications
| Item/Grade | FC45 | FC44 | FC43 | FC42 | FC40 |
| AL2O3 % | 46-48 | 44-48 | 43-48 | 42-46 | 40-46 |
| SiO2 % | 49-52 | 50-53 | 50-53 | 50-53 | 50-54 |
| Fe2O3 % (max) | 1.0 | 1.3 | 2.0 | 2.5 | 3.0 |
| Ti02 % (max) | 0.8 | 0.9 | 1.0 | 1.1 | 1.2 |
| K2O+Na2O % (max) | 0.3 | 0.4 | 0.4 | 0.5 | 0.5 |
| Ca0+Mg0 % (max) | 0.5 | 0.5 | 0.5 | 0.6 | 0.7 |
| Bulk density g/cm³(min) | 2.58 | 2.52 | 2.45 | 2.40 | 2.37 |
| Refractoriness °C(min) | 1780 | 1760 | 1740 | 1720 | 1710 |
| Impurities % (max) | 0.5 | 2.0 | 3.0 | 3.5 | 4.0 |
3. Calcined Flint Clay General advantages
- High refractoriness.
- Stable physical characteristics.
- High bulk density.
- Low porosity.
- Low water absorption.
- Completely calcined evenly.
- Low impurity contents.
4. Calcined Flint Clay Characteristics
- High refractoriness.
- Physicochemical stability.
- Bulk density high.
- Low porosity.
- Low water absorption.
- Fully calcined
- Low impurity content.
5. Calcined Flint Clay Particle sizes Available
- Size of sand: 8-16,16-30,30-60,30-80,60-80,80-120 (mesh):Used for investment casting.
- Size of powder: -200mesh,-270mesh,-325mesh: Used for investment casting and refractories.
- Size of particle: 0-1mm,1-3mm,3-5mm,5-8mm,8-15mm,0-5mm,0-50mm:Used for refractories.
![]()
![]()
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.