SpO2 Patient Monitor Accessories Masima SET 2404 Rainbow RC-12 20 Pin Patient Cable 12 FT

Masima 2404 Rainbow RC-12 20-pin Patient Cable

Masima  2404 Rainbow RC-12 20-pin Patient Cable, 12 FT, Use with Rainbow and M-LNCS Sensors

► Brief Description

Although Masima 2404 Rainbow RC-12 20-pin Patient Cable is a medical device for SpO2 measurement for patients, it is not directly connected to the monitoring site of the patient, but is connected between the monitor and the sensor. It is used together with rainbow and M-LNCS Sensors. It is forbidden to connect with devices that are not within the allowed range, otherwise it will affect the performance between Masima 2404 Rainbow RC-12 20-pin Patient Cable and the connected monitor, and even cause damage to them in serious cases. affect the health of patients. Therefore, for the integrity of the equipment and the health and safety of patients, medical staff must read the instructions or manual carefully before using it.

► Specification

► Precautions

1. Before using the Masima 2404 Rainbow RC-12 20-pin Patient Cable, please be sure to carefully check the appearance of the cable for obvious damage, breakage, etc. If there is any damage, please stop using it immediately and discard it;

2. Do not soak the connector of the Masima 2404 Rainbow RC-12 20-pin Patient Cable in any solution;

3. Do not use radiation, steam, autoclave, or ethylene oxide to sterilize the Masima 2404 Rainbow RC-12 20-pin Patient Cable;

4. Do not use unapproved chemicals in point 2 above to clean the Masima 2404 Rainbow RC-12 20-pin Patient Cable;

5. Do not attempt to rework, repair, or recycle the Masima 2404 Rainbow RC-12 20-pin Patient Cable, as doing so may damage electrical components and pose a potential hazard to the patient.

6. Do not use the Masima 2404 Rainbow RC-12 20-pin Patient Cable without training or thoroughly reading the operation manual to avoid unnecessary accidents.

7. When using the Masima 2404 Rainbow RC-12 20-pin Patient Cable, please pay attention to regularly check whether the cable is loose or falling off, so as not to affect the measurement results.

► Detailed photos

► FAQ:

1. What information is required for the compatibility assessment of rehabilitation medical device accessories?

Please provide the brand, model, and accessory type of the rehabilitation equipment; our technical team will promptly verify the compatibility.

2. Is the interface shape of the accessory identical to that of the original component?

Yes, exactly. The interface shape and curvature are manufactured strictly according to the original specifications to ensure perfect fit with the equipment interface.

3. Will deviations in the interface shape affect installation?

Yes. We strictly control the shape accuracy of the interface to ensure it matches the original, preventing any issues during installation or use.

4. Can we provide an electronic version of the compatibility test report for accessories and equipment?

Yes. We can provide the electronic version of the test report for easy archiving, forwarding, or submission for review.

5. What is the validity period of the compatibility test report?

The report is valid for one year, calculated from the date of test completion. If accessory specifications are updated during this period, we will issue a new test report.

Thank you for your time. If you are interested in our company or our Masima SET 2404 Rainbow RC-12 20-pin Patient Cable, 12 FT, For Use with Rainbow and M-LNCS Sensors, or have any suggestions for us, please feel free to contact us. We will reply you within 12 hours. Wish you a happy life.

90 Day Warranty                             SGS ceryification