Edan M8 M9 IM8 M50 M8B M9B Patient Monitor Parts Power Supply Board
Hospital Medical Equipment Parts Edan M8 M9 IM8 M50 M8B M9B Patient Monitor Power Supply Board
► Brief Introduction
This Power Supply Board is working for Edan M8 M9 IM8 M50 M8B M9B Patient Monitor.
Connection procedure of the AC power line:
- Make sure the AC power supply complies with the following specifications: 100V-240V~, 50Hz/60Hz.
- Apply the power line provided with the monitor. Plug the power line to INPUT interface of the monitor. Connect the other end of the power line to a grounded 3-PHiliphhilipase power output.
► Indicates the status of mains power supply
means the mains power supply is on.
means the mains power supply is off.
► Power Supply Specifications
- 100V-240V~
- 50Hz/60Hz
- Pmax=80VA
- FUSE T 1.6AL
► Specifications
| Portal technology | Compatible |
| Waveforms | 4, 6, 8 (13 ECG) |
| Monitor screen display | One integrated 38cm (15˝) color XGA |
| Multi-Measurement Server (MMS) | Compatible |
| Flexible Module Server (8 measurement slots) |
One supported Flexible Module Server |
| Two internal measurement slots | Optional |
| Networking capability | ptional S |
► Electromagnetic Immunity
| Immunity test | IEC/EN 60601 test level | Compliance level | Electromagnetic environment - guidance |
| Electrical fast transient/burst IEC/EN 61000-4-4 | ±2 kV for power supply lines | ±1kV for power supply lines | Mains power quality should be that of a typical commercial or hospital environment. |
| Power frequency (50/60Hz) magnetic field IEC/EN 61000-4-8 |
3A/m | 3A/m | Power frequency magnetic fields should be at levels characteristic of a typical location in a typical commercial or hospital environment. |
| Voltage dips, short interruptions and voltage variations on power supply input lines IEC/EN61000-4-11 |
<5% UT (>95% dip in UT) for 0.5 cycle 40% UT(60% dip in UT) for 5 cycles 70% UT (30% dip in UT) for 25 cycles <5% UT (>95% dip in UT) for 5 sec |
<5% UT (>95% dip in UT) for 0.5 cycle 40% UT(60% dip in UT) for 5 cycles 70% UT(30% dip in UT) for 25 cycles <5% UT (>95% dip in UT) for 5 sec |
Mains power quality should be that of a typical commercial or hospital environment. If the user of the Patient Monitor requires continued operation during power mains interruptions, it is recommended that the Patient Monitor be powered from an uninterruptible power supply or a battery. |
► About Company
I have supply the medical equipment and parts of Patient Monitor, Defibrillator Machine, ECG Machine,Ultrasound such as
- GE,
- PHiliphhilip,
- Mindray,
- Goldway,
- Nihon Kohden,
- Med-tronic,
- Masima,
- Drager,
- Edan,
- Zoll,
etc.
Please kindly contact us, if you are interested in Edan M8 M9 IM8 M50 M8B M9B Patient Monitor Power Supply Board, Thank you!
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.