Ceramic Electronic Components
Ceramic Electronic Components
Ceramic inserts and tools ground with high precision ensure unobstructed assembly of even the smallest electronic components, both in fully automated production and for manual assembly.
Electrical insulation, high wear-resistance, temperature-resistance
The two most commonly used ceramic materials are 95% alumina and 9% alumina:
(1)95% alumina:Because ofits excellent performance,95% aluminais widely used in grinding and polishing processes, as wel as in the chemical and metalluraical industries. Mainly used as corrosion-resistant and wear-resistant parts.
(2) 99% alumina:99% alumina has high strength and can be used to make high-temperature crucibles,refractory furnace tubes and special wear-resistant materials, such as ceramic pumps, boltimellers,ceramicrollers,ceramicsealsandwatervalves.
| 95Alumina | 99Alumina | 997Alumina | 998Alumina | |
| Color | White | Beige | Beige | Beige |
| Mechanical properties | ||||
| Density(g/cm²) | 3.7 | 3.9 | 3.9 | 3.9 |
| Compressive strength(MPa) | 2500 | 2450 | 2500 | 2600 |
| Tensile strength | / | / | 150 | / |
| Flexural strength(MPa) | 380 | 310 | 400 | / |
| Fracture toughness(MPam) | 3 | 3.5 | 3.5 | / |
| Vickers hardness(GPa) | 13.7 | 15.2 | 17.2 | 18 |
| Young's modulus(Pa) | 300 | 350 | 370 | 360 |
| Poisson's ratio | 0.23 | 0.23 | 0.23 | 0.23 |
| Thermal properties | ||||
| Thermal conductivity@25℃ | 2Ω | 2Ω | 3Ω | 3Ω |
| Thermal expansion@25-300℃(*10) | 7.2 | 7.2 | 6.5 | 7.2 |
| Thermal expansion@25-700℃(*10) | 7.9 | 7.9 | 7.5 | 8.0 |
| Electrical performance | ||||
| Dielectric constant@25℃(1MHz) | 9.0 | 9.2 | 9.9 | 9.7 |
| Dielectric strength | 50 | 20 | 285 | 14 |
| Dielectric loss | 2.6 | 2 | 0.0001 | 1 |
| Volume resistivity@ 25℃(Ωcm) | 10*14 | 10*14 | 10*14 | 10*14 |
| Volume resistivity@ 500℃(Ωcm) | / | / | 2*10*10 | / |
| Volume resistivity@ 1000℃(Ωcm) | / | / | 2*10*4 | / |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.