Front Terminal Sealed Lead Acid UPS Battery 12V 180Ah
12V 180Ah Front Terminal Sealed Lead Acid UPS Battery
FOBERRIA Battery offers the widest selection of front access AGM batteries and GEL batteries.
The gel technology has numerous superiorities over the equivalent AGM battery range, especially for telecommunication applications.
The FL type front terminal battery comes with longer lasting design life and front access connections for fast, easy installation and maintenance, and is ideally suitable for telecom outdoor equipment, renewable energy systems and other severe environments.
>Charging Guidelines
- Ideal charging temperature: 68 degrees Fahrenheit. Avoid charging at temperatures above 122 degrees Fahrenheit.
- In order to achieve optimum performance and long lasting, never discharge battery over 50% of it's full capacity. Avoid discharge your battery more than 80% as this will greatly damage the battery's internal components.
- Always fully charge batteries after each use. Both under and over-charging can reduce the life of the battery.
- Never combine different brand, different age and different capacity batteries together. This will cause serious damage to the battery.
> Specification
|
Battery Model No. |
FBR12V180FT |
|
|
Nominal Voltage |
12V |
|
|
Capacity(25ºC) |
20HR(5.25V) |
180Ah |
|
10HR(5.25V) |
158Ah |
|
|
1HR(4.80V) |
108Ah |
|
|
Dimension |
Length |
560±2mm |
|
Width |
125±2mm |
|
|
Height |
316±2mm |
|
|
Total height |
316±2mm |
|
|
Approx. Weight |
55.5kg±4% |
|
|
Terminal type |
F13 |
|
|
Internal resistance |
Approx 4.2mΩ |
|
|
(Fully charged,25ºC) |
||
|
Capacity affected by |
40ºC |
102% |
|
temperature(20HR) |
25ºC |
100% |
|
|
0ºC |
85% |
|
|
-15ºC |
65% |
|
Self-discharge |
3month |
Remaining Capacity:91% |
|
(25ºC) |
6month |
Remaining Capacity:82% |
|
|
12month |
Remaining Capacity:65% |
|
Nominal operating temperature |
25ºC±3ºC(77ºF±5ºF) |
|
|
Operating |
Discharge |
-15ºC-50ºC(5ºF-122ºF) |
|
temperature range |
Charge |
-10ºC-50ºC(14ºF-122ºF) |
|
|
Storage |
-20ºC-50ºC(-4ºF-122ºF) |
|
Float charging voltage |
13.5 to 13.8V |
|
|
(25ºC) |
Temperature compensation:-18mV/ºC |
|
|
Cyclic charging voltage |
14.5 to 15V |
|
|
(25ºC) |
Temperature compensation:-30mV/ºC |
|
|
Max charging current |
54A |
|
|
Max discharging current |
1400A(5sec.) |
|
|
Designed floating life(20ºC) |
12years |
|
> Structure and composition
| Component | Positive plate | Negative plate | Container | Cover | Separator | Electrolyte | Safety valve | Terminal |
| Raw material | Lead dioxide | Lead | ABS | ABS | AGM | Sulfuric acid | Rubber | Copper |
| F.V/Time | 10min | 15min | 30min | 60min | 2h | 3h | 4h | 5h | 8h | 10h | 20h |
| 9.6V | 381 | 293 | 175 | 108 | 65.8 | 46.8 | 37.8 | 32.3 | 22.0 | 18.3 | 9.71 |
| 9.9V | 369 | 286 | 172 | 106 | 65.4 | 46.5 | 37.6 | 32.1 | 22.1 | 18.3 | 9.69 |
| 10.2V | 354 | 276 | 167 | 104 | 64.8 | 46.2 | 37.3 | 31.9 | 21.9 | 18.2 | 9.66 |
| 10.5V | 339 | 266 | 163 | 101 | 63.8 | 45.9 | 37.1 | 31.7 | 21.8 | 18.1 | 9.61 |
| 10.8V | 320 | 252 | 157 | 98.3 | 62.2 | 44.5 | 36.0 | 30.7 | 21.1 | 18.0 | 9.54 |
>Constant Power Discharge Characteristics(Watt,25ºC)
| F.V/Time | 10min | 15min | 30min | 60min | 2h | 3h | 4h | 5h | 8h | 10h | 20h |
| 9.60V | 4111 | 3221 | 1969 | 1230 | 762 | 551 | 445 | 382 | 264 | 219 | 117 |
| 9.90V | 3987 | 3143 | 1929 | 1212 | 757 | 547 | 442 | 380 | 262 | 218 | 116 |
| 10.2V | 3823 | 3027 | 1870 | 1181 | 750 | 544 | 439 | 377 | 261 | 218 | 116 |
| 10.5V | 3659 | 2924 | 1825 | 1156 | 739 | 540 | 436 | 374 | 259 | 216 | 115 |
| 10.8V | 3453 | 2770 | 1758 | 1121 | 720 | 524 | 423 | 363 | 251 | 215 | 114 |
>Application
1. Front terminal series VRLA battery have been designed to be used in UPS system and telecom equipment.
2. Solar and wind energy storage system
3. Signal system , emergency lighting system , security system
4. Power source for portable devices or tools.
>Features
- GEL Battery cell for 6V 180Ah 12V180Ah 24V180Ah 36V180Ah 48V180Ah
- Designed floating service life: 12~15years @25°C/77°F
- Able to operate at -15°C to +40°C
- Deep Cycle usage: 50% DOD, 1200-1300 Cycles work in high/cold temp. area.
- 3 years Warranty
- Adopt Super-C additives lead plates: Deep discharge recovery capability
- Solar power generation grid, Off Grid energy storage systems, Wind Power Systems,
- Hybrid energy storage systems,Home energy storage systems, Telecom Station
- Renewable energy storage, Smart power grids and micro-grids system
- Distributed energy storage system, UPS and Inverter systems, Emergency lighting system
- Generator and battery hybrid energy system
- Electric Powered Vehicles, Golf Cars and Buggies, Tour bus, Sweeper, Floor cleaning machines,
- Wheel Chairs, Power Tools, Electric Powered Toys, Control System, Medical Equipments,
- Forklift, Marine, RV, Boat, Pumps, and so on.
- Normal, 25-30 days for production with injection molding Lead-plate by ourself
- As a factory we Can Support Urgent project with 10-15days.
- OEM brand is free charge.
> Production Line
>Our Services
We accept OEM .
We accpet sample order for quality testing before production order.
After-Sale Service: Consultacncy and Technical Support
>Delivery & Payment Terms
| Payment Terms | T/T | EXW | 30% in advance for deposit payment, the balance payments will be paid before shipment. | |
| FOB | ||||
| CFR/C&F | 30% in advance for deposit payment, the balance will be paid against copy of B/L | |||
| CIF | ||||
| L/C | For the amount of one shipment above 50,000 usd, L/C at sight is acceptable. | |||
| Delivery Time | 30 days after receiving the payment or the deposit payment | |||
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.