Double Convoluted Suspension Airide Springs Firestone W01-358-5900 WO13585900 For Wood Processing Industry

Firestone W01-358-5900 WO13585900 Double Convoluted Air Spring For Wood Processing Industry

Cross reference

Air spring supplier: Firestone

Supplier number: W01-358-5900; W01 358 5900; W013585900; WO1-358-5900; WO1 358 5900; WO13585900; w01-358-5900; w01 358 5900; w013585900

Also kown as air actuator, air shocks, shock absorbers, air balloon, air spring assembly

Specifications and Tecnical Parameters

DOUBLE CONVOLUTE: WO1-358-5900, 20F2 Style Airspring, Type 3 Bead Plate, (2) 3/8-16 Blind Nuts

About Air Spring

Compared with other traditional coil springs, the air spring has many advantages: A. The stiffness of the rubber air spring changes with the load, and it can independently and widely select the spring height, load capacity and spring stiffness, so that the spring device It has ideal characteristics; B. Using a height control valve, the height of the air spring can be properly controlled according to the requirements of the use, and a certain height can be maintained under the condition of changing load on the spring. C. The rubber air spring has good high-frequency vibration isolation and sound insulation performance. The rubber air spring is composed of air and rubber, and the internal friction is small, and the ability to isolate high-frequency vibration will not be affected by the inherent vibration of the spring itself. In addition, the rubber air spring has no metal-to-metal contact, so the sound insulation and soundproofing effects are very good.

Air spring for Wood Processing Industry

For a long time, Guomat air springs have been used in other industries and have become indispensable and important equipment for these industries. Especially under harsh conditions such as dust, dust, particles or sludge, Guomat air spring actuators generally outperform conventional pneumatic and hydraulic cylinders. For example, coarse particles are generated during wood processing, and air bladder actuators are ideal for this area. With traditional pushrod cylinders, particles can accumulate on the pushrod, causing wear and leakage during movement in the seal. In contrast, bladder-operated actuators do not contain sliding seals and articulating joints. The bellows actuator produces the stroke by deformation of the bellows wall. Dust particles on the walls of the airbag are on the outside and do not come into contact with the seals. Air bladder actuators have low wear characteristics, even under severe operating conditions. Conventional cylinders require precision guides that are expensive and susceptible to dirt and dust. The use of actuators does not require precision rails.

The picture of air spring/ air actuator/ air bag/air spring assembly