8BVI0055HWD0.000-1 B&R ACOPOSmulti Inverter Module
Price:
USD
MOQ:
1EA
Delivery Time:
3-5 working days
Brand:
B&R
Product Description
8BVI0055HWD0.000-1 B&R ACOPOSmulti Inverter Module
MATERIAL NUMBER:
8BVI0055HWD0.000-1DESCRIPTION:
- Integrated uncontrolled standstill and safe stop
- Integrated connection for motor holding brake and temperature sensor
- 2 slots for ACOPOSmulti plug-in modules
- Two fully independent power inverters in one inverter module contained in 2-axis modules
General information
| B&R ID code | 0x20B5 |
| Cooling and mounting type | Wall mounting |
| Slots for plug-in modules | 2 |
| Certifications | |
| CE | Yes |
| Functional safety | Yes |
| UL | cULus E225616 Power conversion equipment |
| EAC | Yes |
| KC | Yes |
DC bus connection
| Voltage | |
| Nominal | 750 VDC |
| Continuous power consumption | 11.19 kW |
| Power dissipation depending on switching frequency | |
| Switching frequency 5 kHz | [1.2 * IM² + 2.62 * IM + 100] W |
| Switching frequency 10 kHz | [2.56 * IM² + 2.8 * IM + 200] W |
| Switching frequency 20 kHz | [6 * IM² - 9.4 * IM + 430] W |
| DC bus capacitance | 330 µF |
| Variant | ACOPOSmulti backplane |
24 VDC power supply
| Input voltage | 25 VDC ±1.6% |
| Input capacitance | 23.5 µF |
| Max. power consumption | 16 W + PSLOT1 + PSLOT2 + P24 V Out + PHoldingBrake(s) |
| Variant | ACOPOSmulti backplane |
24 VDC output
| Quantity | 2 |
| Output voltage | |
| DC bus voltage (UDC): 260 to 315 VDC | 25 VDC * (UDC/315) |
| DC bus voltage (UDC): 315 to 800 VDC | 24 VDC ±6% |
| Fuse protection | 250 mA (slow-blow) electronic, automatic reset |
Motor connection
| Quantity | 2 |
| Continuous power per motor connection | 5.5 kW |
| Continuous current per motor connection | 7.6 Aeff |
| Reduction of continuous current depending on switching frequency | |
| Switching frequency 5 kHz | No reduction |
| Switching frequency 10 kHz | 0.22 A/K (starting at 43°C) |
| Switching frequency 20 kHz | 0.15 A/K (starting at -14°C) |
| Reduction of continuous current depending on installation elevation | |
| Starting at 500 m above sea level | 0.76 Aeff per 1000 m |
| Peak current per motor connection | 18.9 Aeff |
| Nominal switching frequency | 5 kHz |
| Possible switching frequencies | 5 / 10 / 20 kHz |
| Insulation stress of the connected motor per IEC TS 60034-25:2004 | Limit value curve A |
| Protective measures | |
| Overload protection | Yes |
| Short-circuit and ground fault protection | Yes |
| Max. output frequency | 598 Hz |
| Variant | |
| U, V, W, PE | Connector |
| Shield connection | Yes |
| Terminal connection cross section | |
| Flexible and fine-stranded wires | |
| With wire end sleeves | 0.25 to 6 mm² |
| Approbation data | |
| UL/C-UL-US | 30 to 10 AWG |
| CSA | 28 to 10 AWG |
| Terminal cable cross section dimension of shield connection | 12 to 22 mm |
| Max. motor line length depending on switching frequency | |
| Switching frequency 5 kHz | 25 m |
| Switching frequency 10 kHz | 25 m |
| Switching frequency 20 kHz | 10 m |
Motor holding brake connection
| Quantity | 2 |
| Output voltage | 24 VDC +5.8% / -0% |
| Continuous current | 1.1 A |
| Max. internal resistance | 0.5 Ω |
| Extinction potential | Approx. 30 V |
| Max. extinction energy per switching operation | 1.5 Ws |
| Max. switching frequency | 0.5 Hz |
| Protective measures | |
| Overload and short-circuit protection | Yes |
| Open-circuit monitoring | Yes |
| Undervoltage monitoring | Yes |
| Response threshold for open-circuit monitoring | Approx. 0.25 A |
| Response threshold for undervoltage monitoring | 24 VDC +0% / -4% |
Enable inputs
| Quantity | 4 (2 per axis) |
| Circuit | Sink |
| Electrical isolation | |
| Input - Inverter module | Yes |
| Input - Input | Yes |
| Input voltage | |
| Nominal | 24 VDC |
| Maximum | 30 VDC |
| Input current at nominal voltage | Approx. 30 mA |
| Switching threshold | |
| Low | <5 V |
| High | >15 V |
| Switching delay at nominal input voltage | |
| Enable 1 → 0, PWM off | Max. 20.5 ms |
| Enable 0 → 1, ready for PWM | Max. 100 µs |
| Modulation compared to ground potential | Max. ±38 V |
| OSSD signal connections | Permitted Max. test pulse length: 500 µs |
Trigger inputs
| Quantity | 2 |
| Circuit | Sink |
| Electrical isolation | |
| Input - Inverter module | Yes |
| Input - Input | Yes |
| Input voltage | |
| Nominal | 24 VDC |
| Maximum | 30 VDC |
| Switching threshold | |
| Low | <5 V |
| High | >15 V |
| Input current at nominal voltage | Approx. 10 mA |
| Switching delay | |
| Rising edge | 52 µs ±0.5 µs (digitally filtered) |
| Falling edge | 53 µs ±0.5 µs (digitally filtered) |
| Modulation compared to ground potential | Max. ±38 V |
Electrical properties
| Discharge capacitance | 0.2 µF |
Operating conditions
| Permissible mounting orientations | |
| Hanging vertically | Yes |
| Horizontal, face up | Yes |
| Standing horizontally | No |
| Installation elevation above sea level | |
| Nominal | 0 to 500 m |
| Maximum | 4000 m |
| Pollution degree per EN 61800-5-1 | 2 (non-conductive pollution) |
| Overvoltage category per EN 61800-5-1 | III |
| Degree of protection per EN 60529 | IP20 |
Ambient conditions
| Temperature | |
| Operation | |
| Nominal | 5 to 40°C |
| Maximum | 55°C |
| Storage | -25 to 55°C |
| Transport | -25 to 70°C |
| Relative humidity | |
| Operation | 5 to 85% |
| Storage | 5 to 95% |
| Transport | Max. 95% at 40°C |
Mechanical properties
| Dimensions | |
| Width | 53 mm |
| Height | 317 mm |
| Depth | |
| Wall mounting | 263 mm |
| Weight | Approx. 2.9 kg |
| Module width | 1 |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Joyoung International Trading Co.,Ltd
Location
Unit 1602, Top Plaza, No.2 Lujiang Road, Siming District, Xiamen Fujian China
Contact Person
Candy Wang