IOC4T 200-560-000-111 I/O Card Acts As Signal Interface Machinery Protection and Basic Condition Monitoring

IOC4T 200-560-000-111 I/O Card Acts As A Signal Interface Machinery Protection and/or Basic Condition Monitoring

Product Details:

Additional Information:

Description:

The IOC4T input /output card acts as a signal interface for the series MPC4 machinery protection card, from product line. It is installed in the rear of a rack and connects directly to the rack backplane via two connectors.

The front panel of the IOC4T contains terminal strip connectors for wiring to the transmission cables coming from measurement chains (sensors and /or signal conditioners). The screw-terminal connectors are also used to input all signals from and output all signals to any external control system.

The IOC4T card protects all inputs and outputs against electromagnetic interference (EMI) and signal surges and also meets electromagnetic compatibility (EMC) standards.

The IOC4T contains four local relays that can be attributed to any specific alarm signals under software control. For example, these may be used to signal an MPC4 fault or a problem detected by a common alarm (Sensor OK, Alarm and Danger) in a typical application.

For further information on the use of MPC4/IOC4T card pairs in general, refer to the machinery protection system (MPS) hardware manual and the software manuals. For information on the use of MPC4/IOC4T card pairs in functional safety contexts, refer to the refer to the functional safety manual.