X20BT9100 B&R X20 PLC SYSTEM Bus Transmitter X2X Link Bus Transmitter For I/O

Price Negotiable

Price: USD

MOQ: 1EA

Delivery Time: 3-5 DAYS

Brand: B&R

Product Description

X20BT9100 B&R X20 PLC SYSTEM Bus Transmitter X2X Link Bus Transmitter With Supply For I/O

MATERIAL NUMBER:

X20BT9100

DESCRIPTION:

X2X Link bus transmitter
For seamless expansion of the system
Up to 100 m segment length
Supply for internal I/O power supply
Operation only on the rightmost slot

The bus transmitter is used for seamless expansion of the X20 system. Stations can be up to 100 m apart.

The bus transmitter module is only permitted to be operated with a bus module where the internal I/O power supply is connected through (e.g. X20BM11).

If the supply is used for the internal I/O power supply, this potential group is not permitted to be supplied by any other module. An I/O module with bus module X20BM01 must be used to isolate the potential group.

Short description

Bus transmitter	X2X Link bus transmitter with supply for I/O

General information

B&R ID code	0x1BC2
Status indicators	X2X bus function, operating state, module status
Diagnostics
Module run/error	Yes, using LED status indicator and software
X2X bus function	Yes, using LED status indicator
Power consumption
Bus	0.5 W
Internal I/O
As bus transmitter	0.1 W
Additionally as supply module	0.6 W
Additional power dissipation caused by actuators (resistive) [W]	-
Certifications
CE	Yes
UKCA	Yes
ATEX	Zone 2, II 3G Ex nA nC IIA T5 Gc IP20, Ta (see X20 user's manual) FTZÚ 09 ATEX 0083X
UL	cULus E115267 Industrial control equipment
HazLoc	cCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5
EAC	Yes
KC	Yes

Input I/O power supply

Input voltage	24 VDC -15% / +20%
Fuse	Required line fuse: Max. 10 A, slow-blow
Reverse polarity protection	No

Output I/O power supply

Nominal output voltage	24 VDC
Behavior on short circuit	Required line fuse
Permissible contact load	10 A

Operating conditions

Mounting orientation
Horizontal	Yes
Vertical	Yes
Installation elevation above sea level
0 to 2000 m	No limitation
>2000 m	Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529	IP20

Ambient conditions

Temperature
Operation
Horizontal mounting orientation	-25 to 60°C
Vertical mounting orientation	-25 to 50°C
Derating	-
Storage	-40 to 85°C
Transport	-40 to 85°C
Relative humidity
Operation	5 to 95%, non-condensing
Storage	5 to 95%, non-condensing
Transport	5 to 95%, non-condensing