Excellent thermal conductivity circular customized Continuous Casting Mould Tube for CCM

Product introduction

           Mold copper tube is a kind of fittings used in steel casting machine, which is caused by molten steel being directly cast in the copper tube of mold.

            Within the copper tube pulling billet continuous cooling molding, in order to solve the working process of the copper pipe and the cooling of the solidified shell alternately contact and separation, crystallizer copper tube is still bend to one side of a square or rectangular copper pipe, copper pipe inner cavity from top to bottom mouth for conical, brass inner cavity from top to bottom mouth for the double cone of taper section or three or more taper cone, or parabolic shape of inner chamber, The taper of the upper segment or upper segment is greater than that of the lower segment or lower segment. The taper of the face is better than that of the cambered surface. The air gap between the billet shell and the inner wall of the copper pipe can be avoided in the process of working, which is more in line with the shrinkage law of the billet shell.

Product features

1, Our company has designed the maximum heat transfer rate from the meniscus to the bottom of the copper tube.

2, Our company can design the best internal geometry for customers according to the actual situation of steel making, and ensure better use effect and competitive cost performance.

3, Our company electroplating using the most advanced technology in Europe, can ensure that the plating solution is uniformly attached to the inner surface of the copper tube.

Parameters

Application

The copper mould tube is widely used in steel continuous casting machines. The main function of copper mould tube is to solidify the molten steel to the required size and shape.