Transparent Fiber Optic Splice Sleeves EVA Inner 60mm Splice Sleeves PE Outer
60mm Length 1.2mm Stainless Steel Rod Transparent Fiber Optic Splice Sleeves
What is a Fiber Optic Splice Sleeve?
The Fiber Optic Splice Sleeve is commonly known as an optical fiber heat shrink protect sleeve. It is a protective optical fiber splicing component composed of a special cross-linked polyolefin and a hot melt tube.
Why is a Fiber Optic Splice Sleeve necessary?
When splicing the optical fiber with the optical fiber fusion splicer, we will strip off the outer coating and protective layer of the optical fiber. This operation will make the fusion splicing point susceptible to external influences, and the mechanical strength will be reduced accordingly. A Fiber Optic Splice Sleeve provides mechanical and environmental protection for fusion splices of fiber.
Features:
1. High transparent fiber fusion splicing heat shrinkable tube
2. 1.5mm thickness high quality stainless steel
3. 60mm non-stick inner wall, fast welding
4. No air bubbles, no fiber breakage
5. Transparent heat shrinkable tube for simple installation verification
6. Short installation cycle and compatible with most common ovens
Technical Parameters:
|
Specification |
Test method |
Typical data |
|
Tensile strength(MPa) |
ASTM D 2671 |
18 |
|
Elongation at Break (%) |
ASTM D 2671 |
700 |
|
Density(g/cm2) |
ISO R1183D |
0.94 |
|
Dielectric strength (KV/mm) |
IEC 243 |
20 |
|
Permittivity |
IEC 243 |
2.5 |
|
Length rate of change (%) |
ASTM D 2671 |
+5 |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.