FTTB Fusion Ribbon Fiber Splice Sleeve IEC 243 ASTM D 2671

60mm FTTH Fiber Cable Protection Big Hole Fiber Heat Shrink Sleeves

Description:

  A Fiber Cable Protection Big Hole Fiber Heat Shrink Sleeves is consisted of cross linked polyolefin, hot melt tubes and stainless reinforcing steel rod which keep optic transmission properties of optical fiber cable and enhance the protection to optical fiber cable connection. It is friendly operated to the optic fiber during installation without damaged and micro bending.

After the fiber cable reached home (FTTH), normally we use fast connector to for fiber connection. But the cost of fast connector is expensive, a fiber heat shrink sleeve can help to protect the connection easily and with low costing.

Features:

1. Clear sleeve make it easy to detect splice before shrinkage

2. Airproof structure keeping the splice point's good resistance of humidity and temperature

3. Easily use and avoid any damages to the optical cable during installation

4. Single holed(preshrunk) ends eliminates improper fiber threading

5. Smooth, rounded-end stainless steel reinforcing member ends decrease the risk of fiber damage during installation

6. Extended liner length prevents contact between the fiber and the backbone

7. Protect connection point, improve the mechanical strength, it is most reliable way to protect the fusion

8. Easy to operate, reducing the risk of fiber damage during installation

9. Transparent tube, it is easy to see the status of spliced fiber connection

10. Min. shrinks temperature: 120 °C, shrink very fast and very easy to installation

11. Work temperature high (-55°C~100°C), widely used

Sealing structure let closure have good resistance to temperature and humidity performance

Technical Parameters: