FTTH Clear Cable Heat Shrink Fiber Optic Cable Protection Sleeve

Double Stainless Steel Rod FTTH Fiber Fusion Cable Heat Shrink Sleeve

Description: 

  A Double Stainless Steel Rod FTTH Fiber Fusion Cable Heat Shrink Sleeve is consisted of cross linked polyolefin, hot melt tubes and stainless reinforcing steel rod which keep optic transmission properties of optical fiber and enhance the protection to optical fiber splices.

  The outer high quality irradiation cross-linked polyolefin heat shrinkable tubing provides an instant shrink-force and drives the adhesive liner into all areas of the splice and excludes all the air. The stainless steel rod provides additional rigidity to prevent. Misalignment, micro bending or breakage of the fiber according to the diameter after shrinking and accommodate fiber diameter.

  The Fiber Heat Shrink Sleeve was developed to protect and strengthen fusion splices on fiber optic cables. We must be installed on the optical fiber before fiber fusion (otherwise, you will have to break the optical fiber and start again) It is friendly operated to the optic fiber during installation without damaged and micro bending.

Features:

1. Not affect the optical conductivity of the spliced fiber

2. Easy operation, reduce the damage of optical fiber duringl installation

3. Strong practicality

4. Transparent casing make it easy to detect splice before shrinkage

5. Easily use and avoid any damages to the optical fiber during installation

6. Quickly shrink, improving work efficiency

7. extend the service life of the fiber

8. No air bubbles, no fiber breakage

9. 3.9mm big hole, easy to operation

Technical Parameters: