IEC 62196 Fig12 Electric Vehicle Charging Gun Terminal Testing Equipment
IEC 62196 Fig12 Electric Vehicle Charging Gun Terminal Testing Equipment
Complied Standards & Clauses
This testing machine conforms to IEC 62196-1:2020 clause 13.3.1 fig12, table 3, and UL486A-B:2009
Technical Parameters
| Parameter Name | Parameter Data |
| Power Supply | According to customer requirements |
| Test Station | Single |
| Test Rate | (10 ± 2) r/min or (9 ± 1) r/min, adjustable |
| Diameter of Gyration | 75 / 76mm |
| Test Times | 1-99min59s |
| Load Weight | 0.4-70.3Kg |
| Test Height | 260-660mm adjustable |
| Diameter of Bushing | 6.5mm, 9.5mm, 13mm, 14.5mm, 15.9mm, 19.1mm, 22.2mm, 25.4mm, 28.6mm, 31.8mm, 38.1mm, 44.5mm |
| Equipment Dimensions & Weight | L 600mm* W 600mm * H1680mm, approx. 350KG |
| Height adjustment mode | Manual adjustment, with screw slide lifting mechanism |
| Supporting mechanism | Weight tray with force value sensor, touch screen monitoring force value, can achieve 0-965N tension 1min test |
Equipment Overview
This device tests whether threaded terminals and unthreaded terminals can withstand the mechanism stress during normal use. It is mainly used to judge whether the design and structure of the thread clamping terminal meet the requirements of the clamping wire without excessive damage.
It adopts guide screw structure. When used, the number of tests can be preset first, and the set value will automatically stop, and accompanied by sound alarm signal.
The number of tests can be preset before the test. When the preset number of tests is reached, the testing machine automatically stops and an alarm is issued.
Q: What is the diameter of bushing hole for this device?
A: It is 6.5mm, 9.5mm, 13mm, 14.5mm, 15.9mm, 19.1mm, 22.2mm, 25.4mm, 28.6mm, 31.8mm, 38.1mm, 44.5mm (details refer to following table 3).
Q: What is the Rate of Testing for this device?
A: It is (10±2) r/min.
Details:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.