IEC62196-1 EV Mechanical Load Flexing Test Equipment Of Vehicle Plugs Socket-outlets
IEC62196-1 EV Mechanical Load Flexing Test Equipment of Vehicle Plugs Socket-outlets
Complied Standards & Clauses
IEC62196-1: 2014 “Plug, socket-outlets, vehicle connectors and vehicle inlets–Conductive charging of electric vehicle-Part1: General requirements” clause 26.4, figure 14
IEC60309-1: 2012 “Plug, socket-outlets and couplers for industrial purposes–Part1: General requirements” clause 24.4, figure 9
Equipment Structure
It is used to process the mechanical load flexing test of the vehicle plugs, socket-outlets and couplers non-rewireable accessories. The servo motor is used to drive the turntable and make the sample swing from side to side. When the number of tests reaches the set value, the test will automatically stop. Built-in load to adjust the load required by the sample.
Technical Parameters
| Test Station | Single |
| Electrical Control Method | PLC intelligent integrated control, 7-inch humanized touch interface operation |
| Drive Mode | Servo motor |
| Sample Clamping Method | Mechanical clamping, the position of clamping point is adjustable |
| Flexing Angle | 0-360° can be adjusted freely (default 90°, 45°on either side of the vertical) |
| Flexing Rate | 0-60 cycles / min, can be preset |
| Flexing Cycles | 0~999999 can be preset, default 20000 cycles |
| Load Weights | 20N, 25N, 50N, 75N, 100N |
| Load Power | External, load cabinet with adjustable voltage between conductors 0-250V and current AC0-400A adjustable is optional |
| Test Judgment | Judging by the signals given when the current is conducting or not |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.