AIS 038 Battery Crush and Nail Penetration Test Chamber EV Battery Testing Equipment

Complied Standards & Clauses

Conforms to AIS 038 crush test in page no. 79 of 106 cl.no. 3.2, Nail penetration test in page no. 101 of 106 cl.no. 3.3.2 (a)

IEC62133-2012, IS0 12405-4:2018, etc

Equipment Overview

Environmental Requirements:

1. Main power leakage circuit breaker: AC380(1±10%)V (50±0.5)Hz three-phase four-wire + protective ground wire. Install 10㎡ wire, 3P 63A leakage protection switch

2. Power cable: one five-core cable (four-core cable + protective ground wire), about 3 meters long (outside the box)

3. Installation site:

① The ground is flat and well-ventilated;

② No strong vibration around the equipment;

③ No strong electromagnetic field around the equipment;

④ No flammable, explosive, corrosive substances and dust around the equipment;

⑤ Avoid direct sunlight or high temperature and humidity;

⑥ The ground load-bearing capacity of the site: not less than 650kg/m2 (prerequisite: the channel size around the equipment is ≥ 600 mm; the load weight is ≤ 500kg);

⑦ There is appropriate space for use and maintenance around the equipment:

⑧ There should be space around the equipment for at least one person to pass through, i.e. ≥600mm;

⑨ There should be space for the equipment door to open and close normally. And there should be no other objects in front of the equipment door.

4. Environmental conditions: Temperature: 20℃±5℃; Relative humidity: ≤85%RH; Atmospheric pressure: 80kPa～106kPa

Technical Parameters